Fuji Xerox Versant 80 Press, Руководство пользователя

Страница: 992 / 1019

23 Appendix
992
A
ppe
n
d
ix
23
z
When you use Internet Explorer, even if you click "To delete file, click here." in the
[Document Acquisition] screen of the Store & Send Link service, file deletion may not be
performed. In this case, use another browser than Internet Explorer to delete the file.
„
Split Files
You cannot select [Single File for Each Page] when using the Store to Folder or Job Flow
service.
„
Thumbnail View
z Files in a folder may not be displayed in thumbnail view in the following cases. In those
cases, display them in list view.
- Some file is not displayed in thumbnail view even though it is stored in the folder.
- Characters and images are not correctly displayed because they are scaled down from
the actual sizes.
z
The orientation of an image displayed in thumbnail view depends on which orientation
the document was stored in.
z If the power is cut off immediately after a scanned file is stored in a folder, or if the hard
disk space is insufficient to display thumbnails, files in the folder may not be displayed in
thumbnail view. In that case, display them in list view.
„
FTP Transmission for Scan to PC
z By factory default, [Passive Mode] is selected as a transfer mode to send scanned data
via FTP from the machine.
z
You can switch the FTP transfer mode using CentreWare Internet Services, but cannot
switch the mode per job or per destination FTP server.
z Depending on your network environment, operations may not be performed properly
unless the FTP transfer mode is switched from [Passive Mode] to [Active Mode].
z When [IP Filtering] is enabled, make sure to switch the FTP transfer mode to [Active
Mode].
In [Passive Mode], the server permits a client to connect to the port for the data transfer
so that the client starts the connection. [Passive Mode] is commonly used and also has
lower security risk than [Active Mode].
In [Active Mode], a client notifies the server of the port number for the data transfer so
that the server starts the connection. [Active Mode] may incur a security risk such as
impersonation by third parties. In addition, the proper connection may not be available
in a firewall environment. In such a case, select [Passive Mode]. In passive mode, the scan
service and scanner calibration using the Print Server are not available.
„
SMB Transfer for Scan to PC
If you use Mac OS X 10.7 Lion, OS X 10.8 Mountain Lion, or OS X 10.9 Mavericks, contact our
Customer Support Center and ask if your operating system is supported. In passive mode,
the scan service and scanner calibration using the Print Server are not available.
„
Store to WSD
Note • WSD stands for Web services on Devices.
z When the WSD scan port is not activated, [Store to WSD] button is not displayed in the
Services Home screen. Enable the WSD scan port to use the Store to WSD feature on the
machine.