Fuji Xerox Versant 80 Press, Руководство пользователя

Страница: 430 / 1019

13 Tools
430
Too
ls
13
For more information, refer to "Adjust Paper Curl" (P.717).
„
Adjust Air Assist Values
The air-assist function forces air between sheets to eliminate the issue of multi-feeds and
paper jams. You can use this option to adjust the air-assist volume (amount of air to be fed)
for individual custom paper type. Select from [Auto], [Standard Table], [Multi-Feed Handling
Table], [Misfeed Handling Table], [Custom Table 1 to 4], and [Force OFF].
Selecting [Force OFF] disables the air-assist function. When [Auto] is selected, the machine
adjusts the air-assist volume in accordance with the type and weight of the selected paper.
Normally, you do not have to set [Custom Table 1 to 4]. Our service representative sets this
setting if necessary.
Note •
An optional component is required to use this feature. For more information, contact our Customer
Support Center.
„
Adjust Image Transfer
When a toner image transferred on paper is not optimal, you can use this option to set an
optimal transfer voltage for custom paper. Select from [Auto], [Enter Percentage], and
[Select Sample Number].
When [Auto] is selected, transfer voltage is automatically adjusted.
When [Enter Percentage] is selected, set the applied voltage amount in the relative
percentage to the reference voltage value between 10 and 300 %. Different values can be
configured for Side 1 and Side 2.
Also you can adjust transfer voltage by scanning a sample printout for adjustment printed
in [Select Sample Number].
For more information on the image transfer adjustment using sample set, refer to "Adjust Image Transfer Using Sample
Printout" (P.720).
When [Select Sample Number] is selected, select from the preset adjustment values,
between -5 and 10.
„
Adjust Regi-Loop
If you adjust skew for the pre-registration feed, you can use this option to set the
adjustment value for each custom paper.
For the pre-registration feed, set the adjustment value between -9 and 9 mm in 0.3 mm
increments.
„
Adjust Regi-Loop during Side Shifting
If side-to-side shifting often occurs during paper feeding, you can use this option to set
whether to correct side shifting and feed skew.
Select from [Auto], [Side Shifting & Feed Skew Correction], [Side Shifting Only], [Feed Skew
Correction Only], and [Off].
Select [Auto] to apply auto correction for side shifting and feed skew.
Select [Off] not to apply auto correction.
„
Adjust Fold Position
When outputting copies using a folding or booklet binding option, you can adjust the
folding position. Select from [Default Value] or [Type 1] to [Type 10]. You can set an
appropriate folding position in accordance with the type and size of paper selected and
register it to any of [Type 1] to [Type 10].
For more information, refer to "Fold Position Adjustment" (P.709).
„
Adjust Image Transfer for Trail Edge
When an irregular color occurring only at the trail edge in using heavyweight paper,
adjusting the voltage ratio at the second transfer roll in the transfer module, where the