Fuji Xerox Versant 80 Press, Руководство пользователя

Страница: 805 / 1019

Error Code
805
Pro
b
le
m
Solvin
g
22
018-796 [Cause] An LDAP server protocol error occurred as a result of the Address Book operation. The
server returned RFC2251 Result Message No "96" (client loop detected) for Address
Book query.
[Remedy] Have your network administrator confirm the LDAP server status.
018-797
[Cause] An LDAP server protocol error occurred as a result of the Address Book operation. The
server returned RFC2251 Result Message No "97" (referral limit exceeded) for Address
Book query.
[Remedy] Have your network administrator confirm the LDAP server status.
021-210
021-211
021-212 [Cause] An error occurred in the USB IC card reader.
[Remedy] Check the connection between the USB IC card reader and the machine. Switch off the
machine power, make sure that the touch screen is blank, and then switch on the
machine power. If the error still is not resolved, the USB IC card reader may be defective.
Connect an unbroken USB IC card reader and execute the operation again.
021-213
[Cause] There is a problem with the unit price table settings for the accessories which use the
Internet.
[Remedy] The system administrator should exports the unit price table and modify it using
CentreWare Internet Services. Set a number from 1 to 9,999,999 and import the table
modified to the machine.
021-214 [Cause] An error occurred during encrypted communication between the machine and the USB
memory device.
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
on the machine power. Execute the operation again. If the error still is not resolved,
contact our Customer Support Center.
021-215 [Cause] The accounting/billing device connected does not match the device set on the machine.
[Remedy] Change the setting on the machine or connect the correct accounting/billing device,
and switch off the machine power, make sure that the touch screen is blank, and then
switch on the machine power.
021-360
021-361 [Cause] An error occurred.
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
on the machine power. If the same message is displayed again, contact our Customer
Support Center.
021-401 [Cause] The number of authentication devices such as IC Card Reader (sold separately)
connected exceeds the setting value.
[Remedy] Disconnect the authentication device connected.
021-402 [Cause] The address of the proxy server name is incorrect.
[Remedy] Check the followings:
z
LAN cable connection
z
DNS server address setting
z
The default gateway setting
z
The subnet mask setting
If the error still is not resolved after checking the above settings, there may be a network
failure or the proxy server settings may be changed or failed. Consult your system
administrator.
If the network works normally but the error still is not resolved, contact our Customer
Support Center.
Error Code Cause and Remedy