Fuji Xerox Versant 80 Press, Руководство пользователя

Страница: 426 / 1019

13 Tools
426
Too
ls
13
Job Type on Job Status screen
Select the default job types to be shown on the [Completed Jobs] screen under the [Job
Status] screen that is displayed when the <Job Status> button on the control panel is
pressed.
Select from [All Jobs], [Printer & Print from Folder Jobs], [Scan Jobs], and [Job Flow & File
Transfer Jobs].
Default Language
Select the language displayed on the machine.
There are two ways of selecting the language: set in the System Administration mode and
set by local users.
z Setting in the System Administration mode
The language set here is the standard language that is retained even when the machine
is powered off and on.
z
Setting by local users
The language setting in [Language] in the Services Home screen is lost when the machine
is powered off.
Important •
When [English] is selected, only ASCII characters can be used.
• When you set [Language] to [English] on the Services Home screen and an address book entry or
contents of [Details] of Job Flow Sheets is entered in double-byte characters, the characters may not
be displayed properly.
• When you use CentreWare Internet Services to import a CSV file
*
including double-byte characters
other than a selected language, the characters in the file may be garbled or the import may fail.
* : CSV (Comma Separated Values) is a file format that is often used for saving data by spreadsheets and
database programs.
Screen Brightness
You can adjust the screen brightness of the control panel between -16 and +16.
Reconfirm E-mail Recipient
Select whether or not to display the screen to confirm e-mail recipients when sending e-
mails.
Select from [Confirmation Not Required], [Always Reconfirm Recipient], and [Reconfirm if
Multiple Recipients].
Reconfirm E-mail Recipient Button
Set whether or not to display a screen to check available memory when sending e-mails.
Select from [Disabled (Show Memory)] and [Enabled].
Screen After Inserting USB
Select whether or not to display the screen when the machine detects USB memory device
insertion, and also select the screen type at the time.
Select from [Off], [Store to USB], [Media Print - Text], [Media Print - Photos], and [Service
Selection Screen].
Note • If you select [Service Selection Screen], the [USB Device Detected] screen is displayed when a USB
memory device is inserted. You can select [Store to USB], [Media Print - Text], or [Media Print -
Photos].
• If a USB memory device is inserted when the machine is switched off, and then you switch on, the
Services Home screen is displayed.