Fuji Xerox Versant 80 Press, Руководство пользователя

Страница: 664 / 1019

21 Maintenance
664
M
a
int
e
na
nc
e
21
Important • When you replace toner cartridges, toner may spill and soil the floor. We recommend laying paper
on the floor beforehand.
• The use of toner cartridges not recommended by Fuji Xerox may impair quality and performance.
Use only toner cartridges recommended by Fuji Xerox.
• When the remaining amount of toner becomes small, the machine may stop during printing and
display a message. If this happens, replace the toner cartridge to continue copying or printing.
• Replace toner cartridges while the machine is on.
• When the machine is in the Power Saver mode, exit the Power Saver mode by pressing the <Power
Saver> button and the <Machine Status> button on the control panel before you replace the toner
cartridge.
• When replacing the toner cartridge, press the <Machine Status> button and check the current status
for the toner cartridge even when the control panel is lit.
• After the message "The Toner Cartridge needs to be replaced soon" appears on the touch screen,
copy or print density may be reduced slightly.
• If a partially used toner cartridge is used, a message appears and the number of pages that you can
copy or print displayed on the screen may differ considerably.
Note • Monochrome copying and printing is available even when color toners are run out.
1
Open the machine front toner cover.
2
Hold the lower part of the toner cartridge of
the color indicated in the message and gently
pull it out.
Note • "Y" is for yellow, "M" is for magenta, "C" is for
cyan, and "K" is for black.
3
Remove the toner cartridge by holding the
handle on the top of the cartridge while gently
pulling it out.
Important • Pull out the toner cartridge gently. Otherwise,
toner may spill from the cartridge.
• Proper disposal of used waste toner container
is required. The used waste toner container
must be returned to our Customer Support
Center.
4
Take out the new toner cartridge of the same
color as the old one from its box, and gently tilt
the cartridge up and down, and then left and
right several times.