Digi TX54, Руководство пользователя

Страница: 89 / 1087

Interfaces Wide Area Networks (WANs)
TX54 User Guide 89
3. Configure active recovery on WAN1 :
a. Click Network > Interface > WAN1 > IPv4 > SureLink .
b. For Interval , type 10s .
c. Click to expand Test targets .
d. Delete the existing test targets:
Click the menu icon (... ) next to each target and select Delete .
e. For Add Test Target , click

.
f. For Test type , select Ping test .
g. For Ping host , type 43.66.93.111 .
h. For Ping payload size , type 256 .
4. Repeat the above step for WWAN1 and WWAN2 to enable SureLink on those interfaces.
5. Configure WWAN1 to have priority over WWAN2 . The default configurations for WWAN1 and
WWAN2 both have the metric set to 3 , while WAN1 has a metric of 1 . To configure WWAN1 to
have priority over WWAN2 and continue to be serve as a backup to WAN1 , WWAN1's metric
should be set to 2 .