Digi TX54, Руководство пользователя

Страница: 1026 / 1087

Command line interface Auto-complete commands and parameters
TX54 User Guide 1026
------------------------------------------------------------------------
--
ap Show Wi-Fi access points.
client Show Wi-Fi client mode connections.
> show wifi
3. To display a syntax diagram and parameter information:
> show wifi ap ?
Display details for Wi-Fi access points.
Syntax: ap [all] [name {digi_ap1|digi_ap2}]
Parameters
------------------------------------------------------------------------
--
all Display all Wi-Fi access points.
name Investigate a Wi-Fi access point
> show wifi ap
Use the Tab key or the space bar to display abbreviated help
When executed from the root command prompt, pressing the Tab key or the space bar displays an
abbreviated list of available commands:
> <space>
config exit cp help ls mkdir modem
more mv ping reboot rm scp show
system traceroute update
>
Similar behavior is available with any command name:
> config network interface <space>
.. ... defaultip defaultlinklocal lan1
loopback wan1 wwan1 wwan2
> config network interface
Auto-complete commands and parameters
When entering a command and parameter, press the Tab key to cause the command line interface to
auto-complete as much of the command and parameter as possible. Typing the space bar has similar
behavior. If multiple commands are available that will match the entered text, auto-complete is not
performed and the available commands are displayed instead.
Auto-complete applies to these command elements only :