Digi TX54, Руководство пользователя

Страница: 654 / 1087

Services Enable service discovery (mDNS)
TX54 User Guide 654
1. Log into the TX54 WebUI as a user with full Admin access rights.
2. On the menu, click System . Under Configuration , click Device Configuration .
The Configuration window is displayed.
3. Click Services > Service Discovery (mDNS) .
4. Enable the mDNS service.
5. Click Access control list to configure access control:
n
To limit access to specified IPv4 addresses and networks:
a. Click IPv4 Addresses .
b. For Add Address , click

.
c. For Address , enter the IPv4 address or network that can access the device's mDNS
service. Allowed values are:
l
A single IP address or host name.
l
A network designation in CIDR notation, for example, 192.168.1.0/24.
l
any : No limit to IPv4 addresses that can access the mDNS service.
d. Click

again to list additional IP addresses or networks.
n
To limit access to specified IPv6 addresses and networks:
a. Click IPv6 Addresses .
b. For Add Address , click

.
c. For Address , enter the IPv6 address or network that can access the device's mDNS
service. Allowed values are:
l
A single IP address or host name.
l
A network designation in CIDR notation, for example, 2001:db8::/48.
l
any : No limit to IPv6 addresses that can access the mDNS service.
d. Click

again to list additional IP addresses or networks.
n To limit access to hosts connected through a specified interface on the TX54 device:
a. Click Interfaces .
b. For Add Interface , click

.