Digi TX54, Руководство пользователя

Страница: 188 / 1087

Interfaces Bridging
TX54 User Guide 188
/network/wireless/ap/digi_hotspot_ap1
/network/wireless/ap/digi_hotspot_ap2
Default value: /network/bridge/lan1
Current value: /network/bridge/lan1
(config network bridge my_bridge)>
ii. Add the appropriate device. For example, to add the Digi AP (Wi-Fi) Wi-Fi access
point:
(config network bridge my_bridge)> add device end
/network/wireless/ap/digi_ap1
(config)>
5. (Optional) Enable Spanning Tree Protocol (STP).
STP is used when multiple LANs are configured on the same device, to prevent bridge loops
and other routing conflicts.
a. Enable STP:
(config)> network bridge lan1 stp enable true
b. Set the number of seconds that the device will spend in each of the listening and learning
states before the bridge begins forwarding data:
(config)> network bridge lan1 stp forward_delay num
(config)>
The default is 2 seconds.
6. Save the configuration and apply the change:
(config)> save
Configuration saved.
>
7. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu . Type quit to disconnect from the device.
Configure a bridge
Required configuration items
n
A name for the bridge.
Bridges are enabled by default.
n Devices to be included in the bridge.
Additional configuration items
n
Enable Spanning Tree Protocol (STP).
To create a bridge: