Digi TX54, Руководство пользователя

Страница: 653 / 1087

Services Enable service discovery (mDNS)
TX54 User Guide 653
where value is either:
n
active-backup : Transmits data on only one of the bonded devices at a time. When the
active device fails, the next available device in the list is chosen. This mode provides for
fault tolerance.
n
round-robin : Alternates between bonded devices to provide load balancing as well as
fault tolerance.
5. Add Ethernet devices:
a. Use the ? to determine available devices:
(config network bond name )> ... network device ?
Additional Configuration
---------------------------------------------------------------------
-------
eth1
eth2
eth3
eth4
loopback
(config network bond name )>
b. Add a device:
(config network bond name )> add device /network/device/eth1
(config network bond name )>
c. Repeat to add additional devices.
6. Save the configuration and apply the change:
(config)> save
Configuration saved.
>
7. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu . Type quit to disconnect from the device.
Enable service discovery (mDNS)
Multicast DNS mDNS is a protocol that resolves host names in small networks that do not have a DNS
server. You can enable the TX54 device to use mDNS.

WebUI