Digi TX54, Руководство пользователя

Страница: 733 / 1087

User authentication Authentication groups
TX54 User Guide 733
Change the access rights for a predefined group
By default, two authentication groups are predefined: admin and serial . To change the access rights
of the predefined groups:

WebUI
1. Log into the TX54 WebUI as a user with full Admin access rights.
2. On the menu, click System . Under Configuration , click Device Configuration .
The Configuration window is displayed.
3. Click Authentication > Groups .
4. Click the authentication group to be changed, either admin or serial , to expand its
configuration node.
5. Click the box next to the following options, as appropriate, to enable or disable access rights
for each:
n
Admin access
For groups assigned Admin access, you can also determine whether the Access level
should be Full access or Read-only access .
l
Full access provides users of this group with the ability to manage the TX54 device
by using the WebUI or the Admin CLI.
l
Read-only access provides users of this group with read-only access to the WebUI
and Admin CLI.
The default is Full access .
n
Interactive shell access
Shell access is not available if the Allow shell parameter has been disabled. See Disable
shell access for more information about the Allow shell parameter.
n
Serial access