Digi TX54, Руководство пользователя

Страница: 599 / 1087

Services Location information
TX54 User Guide 599
Repeat this step to list additional firewall zones.
8. 1. Save the configuration and apply the change:
(config)> save
Configuration saved.
>
2. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu . Type quit to disconnect from the device.
Forward location information to a remote host
You can configure location clients on the TX54 device that forward location messages in either
NMEA or TAIP format to a remote host.
Required configuration items
n
Enable the location service.
n
The hostname or IP address of the remote host to which the location messages will be
forwarded.
n
The communication protocol, either TCP or UDP.
n
The destination port on the remote host to which the messages will be forwarded.
n
Message protocol type of the messages being forwarded, either NMEA or TAIP.
Additional configuration items
n
Additional remote hosts to which the location messages will be forwarded.
n
Location update interval, which determines how often the device will forward location
information to the remote hosts.
n
A description of the remote hosts.
n
Specific types of NMEA or TAIP messages that should be forwarded.
n
If the message protocol is NMEA, configure a talker ID to be used for all messages.
n
Text that will be prepended to the forwarded message.
n A vehicle ID that is used in the TAIP ID message and can also be prepended to the forwarded
message.
Configure the TX54 device to forward location information:

WebUI
1. Log into the TX54 WebUI as a user with full Admin access rights.
2. On the menu, click System . Under Configuration , click Device Configuration .