Digi TX54, Руководство пользователя

Страница: 318 / 1087

Hotspot Hotspot configuration
TX54 User Guide 318
17. (Optional) Change the default maximum upload speed:
(config network hotspot new_hotspot)> bandwidth_max_up value
(config network hotspot new_hotspot)>
where value is an integer between 1 and 100000 and represents the maximum upload speed in
Kbps.
18. (Optional) Enable verbose logging to the system log:
(config network hotspot new_hotspot)> debug true
(config network hotspot new_hotspot)>
19. Save the configuration and apply the change:
(config)> save
Configuration saved.
>
20. Type exit to exit the Admin CLI.
Depending on your device configuration, you may be presented with an Access selection
menu . Type quit to disconnect from the device.
Configure the hotspot to use local shared password authentication
Local shared password authentication requires each user to enter a password. This password is
validated locally on the TX54 device, and the password is the same for all users.
By default, the router redirects unauthenticated users to the HTML authentication page located on the
router at
etc/config/hotspot/password.html . You can customize the authentication page as needed,
or host an authentication page on a remote server. See Customize the hotspot login page for further
information.
Required configuration items
n
Create a new hotspot or Enable hotspot using the default configuration .
n Select local shared password authentication.
n
The local password that will be used for authentication.
Additional configuration items
n
Modify the local HTML authentication page, /etc/config/hotspot/password.html , or enter the
name of an alternative HTML authentication page stored in the same directory, or identify a
remote web server to host the HTML authentication page and include that server in the "white
list" of servers that unauthenticated hotspot clients can access. See
Customize the hotspot
login page for further information.
Hotspot LAN configuration:

Configure hotspot for local shared password authentication from the WebUI