Digi TX54, Руководство пользователя

Страница: 322 / 1087

Hotspot Hotspot configuration
TX54 User Guide 322
n
To add domains that can be accessed by the client prior to authentication:
a. Click to expand Allowed domains .
b. Click

to add a domain.
c. For Domain , type the hostname of the allowed domain.
d. Repeat to add additional domains.
n
To add subnets that can be accessed by the client prior to authentication:
a. Click to expand Allowed subnets .
b. Click

to add a subnet.
c. For Subnet , type an IPv4 address and optional subnet mask, using the format IPv4_
address [/ netmask ], or the keyword any .
d. Repeat to add additional subnets.
7. Click Apply to save the configuration and apply the change.

Configure hotspot for RADIUS shared password authentication from the Command line
1. Log into the TX54 command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an Access selection
menu . Type admin to access the Admin CLI.
2. At the command line, type config to enter configuration mode:
> config
(config)>
3. Create a new hotspot or Enable hotspot using the default configuration .
4. Set the authentication mode to radius-shared-password :
(config)> network hotspot hotspot_name auth radius-shared-password
(config)>
5. Configure the RADIUS server:
a. Set the fully qualified domain name or IP address of the primary RADIUS server:
(config)> network hotspot hotspot_name radius primary_radius_server
address
(config)>
b. (Optional) Set the fully qualified domain name or IP address of the secondary RADIUS
server, used if the primary RADIUS server is unreachable:
(config)> network hotspot hotspot_name radius backup_radius_server
address
(config)>