Digi TX54, Руководство пользователя

Страница: 765 / 1087

User authentication Remote Authentication Dial-In User Service (RADIUS)
TX54 User Guide 765
3. Click Authentication > RADIUS > Servers .
4. Add RADIUS servers:
a. For Add server , click

.
b. For Hostname , type the hostname or IP address of the RADIUS server.
c. (Optional) Change the default Port setting to the appropriate port. Normally this should
be left at the default setting of port 1812.
d. For Secret , type the RADIUS server's shared secret. This is configured in the secret
parameter of the RADIUS server's client.conf file, for example:
secret=testing123
e. For Timeout , type or select the amount of time in seconds to wait for the RADIUS server to
respond. Allowed value is any integer from 3 to 60 . The default value is 3 .
f. (Optional) Click

again to add additional RADIUS servers.
5. (Optional) Enable Authoritative to prevent other authentication methods from being used if
RADIUS authentication fails. Other authentication methods will only be used if the RADIUS
server is unavailable.
6. (Optional) Click RADIUS debug to enable additional debug messages from the RADIUS client.
7. (Optional) For NAS ID , type the unique identifier for this network access server (NAS). You can
use the fully-qualified domain name of the NAS or any arbitrary string. If not set, the default
value is used:
n If you are accessing the TX54 device by using the WebUI, the default value is for
NAS ID is
httpd .
n
If you are accessing the TX54 device by using ssh, the default value is sshd .