Digi TX54, Руководство пользователя

Страница: 878 / 1087

System administration Erase device configuration and reset to factory defaults
TX54 User Guide 878
n
Configuration reset :
l
Press and hold the RESET button for 10 seconds.
l
The device reboots automatically and resets to factory defaults. This does not
remove any automatically generated certificates and keys.
n
Full device reset :
l
After the device reboots from the first button press, immediately press and hold the
RESET button for 10 seconds again.
l
The device reboots again and resets to factory defaults, as well as also removing
generated certificates and keys.
3. After resetting the device:
a. Connect to the TX54 by using the serial port or by using an Ethernet cable to connect the
TX54 LAN1 port to your PC.
b. Log into the TX54:
User name : Use the default user name: admin .
Password : Use the unique password printed on the bottom label of the device (or the
printed label included in the package).
When you first log into the WebUI or the command line, you will be required the change
the SSIDs and pre-shared keys (passwords) for the preconfigured Wi-Fi access points
before you can save any configuration changes. See
Reset default SSIDs and pre-shared
keys for the preconfigured Wi-Fi access points for instructions.
c. (Optional) Reset the default password for the admin account. See Change the default
password for the admin user for further information.
Reset the device with the revert command
You can reset the device to the default configuration without removing scripts, keys, and logfiles by
using the
revert command:
1. Log into the TX54 command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an Access selection
menu . Type admin to access the Admin CLI.
2. At the command line, type config to enter configuration mode:
> config
(config)>
3. At the config prompt, enter revert :
(config)> revert
(config)>
4. Set the password for the admin user prior to saving the changes:
(config)> auth user admin password pwd
(config)>