Digi TX54, Руководство пользователя

Страница: 394 / 1087

Routing Virtual Router Redundancy Protocol (VRRP)
TX54 User Guide 394
3. Click to expand Monitor interfaces .
4. Click

to add an interface for monitoring.
5. Select Interface: WWAN1 .
6. Click to enable Monitor VRRP+ master .
7. For Priority modifier , type 30 .
Task 3: Configure the IP address for the VRRP interface, LAN1, on device two
1. Click Network > Interfaces > LAN1 > IPv4
2. For Address , type 192.168.3.2/24 .
3. For Default gateway , type the IP address of the VRRP interface on the master device,
configured above in Task 3, step 2 ( 192.168.3.1 ).
Task 4: Configure SureLink for LAN1 on device two
1. Click Network > Interfaces > LAN1 > IPv4 > SureLink .
2. Click Enable .
3. For Interval , type 15s .
4. Click to expand Test targets > Test target .
5. For Test Type , select Ping test .
6. For Ping host , type my.devicecloud.com .