Digi TX54, Руководство пользователя

Страница: 252 / 1087

Wi-Fi Configure a Wi-Fi access point with personal security
TX54 User Guide 252
2. At the command line, type config to enter configuration mode:
> config
(config)>
3. Create a new access point:
(config)> add network wifi ap new_AP
(config network wifi ap new_AP)>
New access points are enabled by default.
4. Set the Wi-Fi radio for the new access point:
a. Show available radios:
(config network wifi ap new_AP)> radio ?
Radio: The Wi-Fi radio to run this access point on.
Format:
wifi1
wifi2
Current value:
(config network wifi ap new_AP)>
b. Set the appropriate radio:
(config network wifi ap new_AP)> radio wifi1
(config network wifi ap new_AP)>
5. Set the SSID for the Wi-Fi access point. Up to 32 characters are allowed.
(config network wifi ap new_AP)> ssid my_SSID
(config network wifi ap new_AP)>
SSID broadcasting is enabled by default for new access points.
6. Set the security for the access point to a personal security option:
(config network wifi ap new_AP)> encryption type value
(config network wifi ap new_AP)>
where value is one of:
n psk : Uses WPA Personal (PSK). All Wi-Fi clients must support WPA to be able to
authenticate.
n
mixedpsk : Uses mixed WPA/WPA2 Personal (PSK) mode. Wi-Fi clients that support WPA
and WPA2 are able to authenticate.
n
psk2 : Uses WPA2 Personal (PSK) mode. All Wi-Fi clients must support WPA2 to be able
to authenticate.
n
psk2sae : Uses WPA2-PSK/WPA3-AES mixed mode. Wi-Fi clients that support WPA2 and
WPA3 are able to authenticate.
n sae : Uses WPA3 Personal mode. All Wi-Fi clients must support WPA3 to be able to
authenticate.