Digi TX54, Руководство пользователя

Страница: 290 / 1087

Hotspot Hotspot configuration
TX54 User Guide 290
Enable hotspot using the default configuration
The default configuration of the TX54 device's hotspot is:
Default configuration
Hotspot
n
Name: hotspot
n
Disabled
n
Authentication mode: Click-through
n
IP address: 10.1.0.1/24
n
DHCP server: Automatically enabled
n
DHCP server lease range: 100-250
n
Bandwidth limits:
l
Maximum download speed: 10000 Kbps
l
Maximum upload speed: 10000 Kbps
Bridge
n
Name: hotspot_bridge
n
Disabled
n
2.4 GHz Wi-Fi access point: Digi Hotspot AP (Wi-
Fi) (single-Wi-Fi models)
n
2.4 GHz Wi-Fi access point: Digi Hotspot AP (Wi-
Fi1) (dual-Wi-Fi models)
n
5 GHz Wi-Fi access point: Digi Hotspot AP (Wi-
Fi2) (dual-Wi-Fi models)
Access points
n
Name:
l
Digi Hotspot AP (Wi-Fi) (single-Wi-Fi models)
l
Digi Hotspot AP (Wi-Fi1) (dual-Wi-Fi models)
l
Digi Hotspot AP (Wi-Fi2) (dual-Wi-Fi models)
n
Disabled
n
SSID: Digi Hotspot
n
Encryption: Open (unencrypted)
n
Hotspot access points should be set to open
(unencrypted). See
Hotspot security for further
information.
LAN
n
Name: LAN hotspot
n
Disabled
n
Device: hotspot_bridge
n
IP address: 192.168.100.1/30
This IP address is not used by the hotspot or the
hotspot's DHCP server. It must be a unique IP
address that is not used elsewhere in your
network.
n
DHCP server: Disabled
n
The hotspot will use the hotspot's DHCP server
rather than the LAN's DHCP server.
To use the default hotspot with click-through authentication, enable the hotspot, the bridge, the
access points, and the LAN.
In additional to enabling the default hotspot configuration, you may also want to: