Digi TX54, Руководство пользователя

Страница: 296 / 1087

Hotspot Hotspot configuration
TX54 User Guide 296
6. Change the default SSID, Digi Hotspot, to your preferred value.
7. Click Apply to save the configuration and apply the change.

Command line
1. Log into the TX54 command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an Access selection
menu . Type admin to access the Admin CLI.
2. At the command line, type config to enter configuration mode:
> config
(config)>
3. Change the SSID for digi_hotspot_ap (single-Wi-Fi models) or digi_hotspot_ap1 (dual-Wi-Fi
models) to your preferred value:
(config)> network wifi ap digi_hotspot_ap1 ssid value
where value is a string of 1 to 32 characters. If the value contains spaces, enclose in quote
marks ( " ).
4. (Dual-Wi-Fi models): Change the SSID for digi_hotspot_ap2 to your preferred value:
(config)> network wifi ap digi_hotspot_ap1 ssid value
where value is a string of 1 to 32 characters. If the value contains spaces, enclose in quote
marks ( " ).
5. Save the configuration and apply the change:
(config)> save
Configuration saved.
>