Digi TX54, Руководство пользователя

Страница: 409 / 1087

Virtual Private Networks (VPN) IPsec
TX54 User Guide 409
For FQDN ID value , type the ID as an FQDN.
n
KeyID : The ID will be interpreted as a Key ID and sent as an ID_KEY_ID IKE
identity.
For KEYID ID value , type the key ID.
n
MAC address : The device's primary MAC address will be used as the ID and
sent as a ID_KEY_ID IKE identity.
n
Serial number : The device's serial number will be used as the ID and sent as a
ID_KEY_ID IKE identity.
20. Click to expand Policies .
Policies define the network traffic that will be encapsulated by this tunnel.
a. Click

to create a new policy.
The new policy configuration is displayed.
b. Click to expand Local traffic selector .
c. For Type , select one of the following:
n
Address : The address of a local network interface.
For Address , select the appropriate interface.
n
Network : The subnet of a local network interface.
For Address , select the appropriate interface.
n
Custom network : A user-defined network.
For Custom network , enter the IPv4 address and optional netmask.
n
Request a network : Requests a network from the remote peer.
n
Dynamic : Uses the address of the local endpoint.
d. For Protocol , select one of the following:
n
Any : Matches any protocol.
n
TCP : Matches TCP protocol only.
n
UDP : Matches UDP protocol only.
n
ICMP : Matches ICMP requests only.
n Other protocol : Matches an unlisted protocol.
If Other protocol is selected, type the number of the protocol.