Daikin VRV EMERION RXYQ-AATJA, Руководство по обслуживанию, Страница: 97 / 429

SiUS342303E Centralized Control Group No. Setting
Part 3 Remote Controller 90
5.2 BRC1H71W
5.3 Wireless Remote Controller
Group No. setting by wireless remote controller for centralized control
1. When in the normal mode, press
INSPECTION/TEST button for 4 seconds or more to enter field
setting mode.
2. Set mode No. 00 with MODE button.
3. Set the group No. for each group with UP button or DOWN button.
4. Enter the selected group numbers by pressing RESERVE button.
Group Address
• Assign the gro u p address and u nit n u m b er for centralized control.
• The gro u p and u nit address can only b e set when a centralized controller is connected.
This men u is only v isi b le when a centralized controller is connected.
• The gro u p and u nit address can b e “set” and “released”.
NOTICE
Don’t forget to release the gro u p address b efore disconnecting the centralized controller b eca u se the
men u will not b e accessi b le afterwards.
- Maintenance
- RC settings
Set the indoor unit group address.
After all settings are complete, press
the “Send to RC” button.
Main
- Installer setting
- Maintenance
- RC settings
You can switch between setting the
indoor unit group address for each
group, or for each unit.
- Installer setting
- Maintenance
- RC settings
Group
Set the group address on a per-
group basis.
* Set a group address only for the MAIN
unit.
Unit
Set the group address on a per-unit
basis.
Force operation of the fan of the unit
number whose icon has been tapped.
device on which you are performing
settings.
- Installer setting
You can confirm the location of the