Daikin VRV EMERION RXYQ-AATJA, Руководство по обслуживанию, Страница: 102 / 429

Service Settings Menu, Maintenance Menu SiUS342303E
95 Part 3 Remote Controller
Error Display Display error ON Displays the error on the screen.
Display error OFF Displays neither errors nor warnings.
Display warning ON Displays a warning on the screen if an error occurs.
Display warning OFF No warning is displayed.
Swap Unit No. Current Unit No. A unit No. can be transferred to another.
Transfer Unit No.
Addressed Sensor
Value
Unit No.: 0 - 15 Select the unit number you want to check.
Code
00:
01:
02:
03:
04:
05:
06:
07:
08:
09:
30: (

4)
31: (

4)(

5)
32: (

4)(

5)
33: (

4)
34: (

4)(

5)
35: (

4)(

6)
Remote controller thermistor (°C)
Suction air thermistor (°C)
Heat exchanger liquid pipe thermistor (°C)
Heat exchanger gas pipe thermistor (°C)
Indoor unit address No.
Outdoor unit address No.
Branch Selector unit address No.
Zone control address No.
Cooling/Heating batch address No.
Demand/low-noise address No.
Displays thermostat step 1 ON/OFF.
Thermostat step 1 OFF: 00
Thermostat step 1 ON: 01
Displays the heat demand that CXTQ-TA is currently
sending to the gas furnace (%).
Displays the fan demand that CXTQ-TA is currently
sending to the gas furnace (%).
Current status of heat pump ON/OFF for CXTQ-TA
HP OFF: 00
HP ON: 01
Current status of gas combustion heating
Displays current heat actual status (%).
Current airflow of the fan
Displays current airflow (CFM).
Data The corresponding data will be displayed, based on
the unit number and Code selected.

1 (For FXTQ-TA, CXTQ-TA models)
The actual fan speed is converted into the fan tap to be displayed. Therefore, if the fan speed
is changed by controls or external factors, the airflow rate set with the remote controller may
differ from the fan tap display.

2 (For FXTQ-TA models)
0 rpm is displayed even if the fan is rotating.
(For CXTQ-TA models)
- rpm is displayed even if the fan is rotating.

3 (For FXTQ-TA, CXTQ-TA models)
The ON/OFF status of the humidifier connected to HUMIDIFIER on the X1M terminal of the
indoor unit PCB is not displayed. The ON/OFF status of the humidifier connected to the
wiring adaptor is displayed.

4 Only for CXTQ-TA

5 Displays 99 when it is more than 100%.

6 Display unit is by 100 CFM.
(ex. Displays
19 for 1850 CFM. Displays 18 for 1849 CFM.)
Maintenance Menu Item 2 Remarks