Daikin VRV EMERION RXYQ-AATJA, Руководство по обслуживанию

Страница: 244 / 429

Troubleshooting by Error Code SiUS342303E
237 Part 6 Service Diagnosis
3.2.2 Outdoor Unit, System
C6 - 02
Indoor blower does not have required parameters to
function
Refer to page 290.
U4 - 01 Indoor-outdoor transmission error Refer to the U4 flowchart.
UA - 13
Refrigerant type error The type of refrigerant used for the indoor unit is different
from that used for the outdoor unit.
UA - 15
Not applicable for self-cleaning decoration panel
[when the self-cleaning decoration panel is mounted]
An outdoor unit is not applicable for the self-cleaning
decoration panel is connected.
UA - 17 Incorrect electric heater capacity setting Refer to page 361.
UH - 05
Climate Talk Communication system combination error
(before initial setting for communication completes)
Refer to page 369.
UH - 06
Climate Talk Communication system combination error
(after initial setting for communication completes)
Refer to page 370.
Error code
Troubleshooting
Error Description Diagnosis
E1 - 01 Outdoor unit PCB error Refer to the E1 flowchart and make a diagnosis of the
relevant unit based on the Error code shown to the left.
E1 - 02 Defective outdoor unit PCB
E1 - 08 Outdoor unit sub PCB error (Master)
E1 - 09 Outdoor unit sub PCB error (Sub)
E2 - 01 Ground leakage detection error (Master) Refer to the E2 flowchart and make a diagnosis of the
relevant unit based on the Error code shown to the left.
E2 - 02 Ground leakage detection error (Sub)
E2 - 06 Missing of ground leakage detection core (Master)
E2 - 07 Missing of ground leakage detection core (Sub)
E3 - 01 Activation of high pressure switch S1PH (Master) Refer to the E3 flowchart and make a diagnosis of the
relevant unit based on the Error code shown to the left.
E3 - 02 High pressure sensor error (Master)
E3 - 03 Activation of high pressure switch S1PH (Sub)
E3 - 04 High pressure sensor error (Sub)
E3 - 07 High pressure standby E3 latch error (System integrated)
E3 - 13 Liquid stop valve check error (Master)
E3 - 14 Liquid stop valve check error (Sub)
E3 - 18 Overall retry of high pressure switch
E3 - 20 Activation of high pressure switch S2PH (Master)
E3 - 21 Activation of high pressure switch S2PH (Sub)
E4 - 01 Low pressure sensor error (Master) Refer to the E4 flowchart and make a diagnosis of the
relevant unit based on the Error code shown to the left.
E4 - 02 Low pressure sensor error (Sub)
E5 - 01 Compressor M1C lock (Master) Refer to the E5 flowchart and make a diagnosis of the
relevant unit based on the Error code shown to the left.
E5 - 02 Compressor M1C lock (Sub)
E5 - 07 Compressor M2C lock (Master)
E5 - 08 Compressor M2C lock (Sub)
E6 - 11 Compressor damage error: Compressor M1C (Master) Refer to the E6 flowchart and make a diagnosis of the
relevant unit based on the Error code shown to the left.
E6 - 12 Compressor damage error: Compressor M2C (Master)
E6 - 13 Compressor damage error: Compressor M1C (Sub)
E6 - 14 Compressor damage error: Compressor M2C (Sub)
E6 - 17 Compressor damage warning: Compressor M1C (Master)
E6 - 18 Compressor damage warning: Compressor M2C (Master)
E6 - 19 Compressor damage warning: Compressor M1C (Sub)
E6 - 20 Compressor damage warning: Compressor M2C (Sub)
Error code
Troubleshooting
Error Description Diagnosis