Control Techniques COMMANDER SE, Руководство для продвинутых пользователей

Страница: 2 / 195

Safety Information
Persons supervising and performing the electrical installation or maintenance of a Drive and/or an
external Option Unit must be suitably qualified and competent in these duties. They should be given
the opportunity to study and if necessary to discuss this User Guide before work is started.
The voltages present in the Drive and external Option Units are capable of inflicting a severe electric
shock and may be lethal. The Stop function of the Drive does not remove dangerous voltages from
the terminals of the Drive and external Option Unit. Mains supplies should be removed and left
removed for a minimum of 10 minutes before any servicing work is performed.
The installation instructions should be adhered to. Any questions or doubt should be referred to the
supplier of the equipment. It is the responsibility of the owner or user to ensure that the installation of
the Drive and external Option Unit, and the way in which they are operated and maintained complies
with the requirements of the Health and Safety at Work Act in the United Kingdom and applicable
legislation and regulations and codes of practice in the UK or elsewhere.
The Drive software may incorporate an optional Auto-start facility. In order to prevent the risk of injury
to personnel working on or near the motor or its driven equipment and to prevent potential damage
to equipment, users and operators, all necessary precautions must be taken if operating the Drive in
this mode.
The Stop and Start inputs of the Drive should not be relied upon to ensure safety of personnel. If a
safety hazard could exist from unexpected starting of the Drive, an interlock should be installed to
prevent the motor being inadvertently started.
General Information
The manufacturer accepts no liability for any consequences resulting from inappropriate, negligent
or incorrect installation or adjustment of the optional operating parameters of the equipment or from
mismatching the Drive with the motor.
The contents of this User Guide are believed to be correct at the time of printing. In the interests of a
commitment to a policy of continuous development and improvement, the manufacturer reserves the
right to change the specification of the product or its performance, or the contents of the User Guide,
without notice.
All rights reserved. No part of this User Guide may be reproduced or transmitted in any form or by
any means, electrical or mechanical including photocopying, recording or by any information storage
or retrieval system, without permission in writing from the publisher.
Important! Drive software version
This product is supplied with the latest version of user interface and machine control software. Please
check that it is compatible with your application, i.e. if you already have Drives running in a system,
there may be some differences between the existing software and the updated product software,
causing varying functionality. This may also apply to Drives returned from Control techniques Service
Centre.
If in doubt, please contact your nearest Control Techniques Drive Centre.
Copyright © June 2004 Control Techniques Drives Limited
Issue Code: 4
Software: V02.00.01 and greater