Device Management
Configuring the RADIUS Servers
Cisco ISA500 Series Integrated Security Appliance Administrator Guide
319
10
STEP 3
Click
Save
to apply your settings.
Configuring the RADIUS Servers
Use the RADIUS Servers page to configure the RADIUS servers that are used to
authenticate the users who try to access your network resources. A RADIUS
group includes a primary RADIUS server and a backup RADIUS server. The
security appliance predefines three RADIUS groups.
STEP 1
Click
Device Management ->
RADIUS Servers
.
The RADIUS Servers window opens. All predefined RADIUS groups are listed in
the table.
STEP 2
To edit the settings of the predefined RADIUS group, click
Edit
in the
Configuration
column.
After you click Edit, the RADIUS Group - Edit window opens.
STEP 3
Enter the following information:
•
Primay RADIUS Server IP:
Enter the IP address of the primary RADIUS
server.
•
Primay RADIUS Server Port:
Enter the port number on the primary RADIUS
server that is used to send the RADIUS traffic. The default is 1812.
•
Primay RADIUS Server Pre-shared Key:
Enter the pre-shared key that is
configured on the primary RADIUS server.
Syslog
Email
Send the syslog messages
on schedule to the
specified email receiver.
To specify the syslogs to be
sent, see
To Email Address:
Enter
the email address to
receive the alert messages.
Alert
Category
Description Configurations
