Cisco ISA500 Series, Руководство администратора

Страница: 150 / 371

Networking
Configuring the Quality of Service
Cisco ISA500 Series Integrated Security Appliance Administrator Guide 144
4
STEP 3
If needed, you can enter a brief description for each queue in the Queue
Description field.
STEP 4
Click Save to apply your settings.
Configuring the Traffic Selectors for WAN Interfaces
Traffic Selector (or Traffic Classification) is used to classify the traffic through WAN
interfaces to a given traffic class so that traffic in need of management can be
identified.
NOTE
The security appliance allows you to create up to 256 traffic selectors.
STEP 1
Click Networking -> QoS -> WAN QoS -> Traffic Selector (Classification) .
The Traffic Selector window opens. All existing traffic selectors are listed in the
table.
STEP 2
To add a new traffic selector, click Add .
Other options: To edit an entry, click Edit . To delete an entry, click Delete .
After you click Add or Edit, the QoS Class - Add/Edit window opens.
STEP 3
Enter the following information:
• Class Name: Enter a descriptive name for the traffic class.
• Source Address: Choose Any or choose an existing address or group
address (network) that the traffic comes from.
• Destination Address: Choose Any or choose an existing address or group
address (network) that the traffic goes to.
If the address objects you want are not in the list, choose Create a Group
Address to create a new group address object or choose Create a Single
Address to create a new address object. To maintain the address or group
address objects, go to the Networking -> Address Object Management
page. See Address Management, page 152 .
• Source Service: Choose Any or choose an existing service from the drop-
down list.