Canon imageRUNNER ADVANCE C5255, Руководство по обслуживанию, Страница: 977 / 1443

8
8
8-157
8-157
Service Mode > COPIER > OPTION > FNC-SW
Service Mode > COPIER > OPTION > FNC-SW
COPIER > OPTION > FNC-SW
BXSHIFT Setting of binding at 0mm binding margin
Lv.1 Details To set whether to judge the job as a job “without binding” when storing
a PDL job in Inbox while the binding margin is set to “0”.
By setting the binding margin to 0 mm while “0” is set, the job is
processed as “without binding”. “Booklet” in “Options” on the Inbox
screen can be also used.When “1” is set, it is judged as “with binding”
even the binding margin is 0 mm so “Booklet”, which has an exclusive
relationship with “binding”, cannot be used.
Use case Upon user’s request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution When storing a PDL job in Inbox while 1 is set, “Booklet” in “Options”
on the Inbox screen cannot be used.
Display/adj/set range 0 to 1
0: Without binding, 1: With binding
Default value 0
SELF-CHK [Not used]
HOME-SW Set screen displayed with Main Menu key
Lv.1 Details To set whether to display the main menu screen or the screen
registered as the startup screen when pressing Main Menu key.
Use case Upon user’s request (to change the startup screen)
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range
0 to 1
0: Main Menu screen, 1: Screen registered as the startup screen
Default value 0
NO-LGOUT Display/hide of logout button
Lv.1 Details To set whether to display or hide [Logout] button.
When 0 is set, [Logout] button is displayed on the screen, and logout
with the ID key is enabled. (Normal)
When 1 is set, [Logout] button is not displayed, and logout with the ID
key is disabled.
Use case Upon user’s request (for customization, etc.)
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range
0 to 1
0: Display, 1: Hide
Default value 0
COPIER > OPTION > FNC-SW
T-DLV-BK Pre-toner low alarm send timing:Bk toner
Lv.2 Details To set the remaining toner level to send the pre-toner low alarm.
When the toner level in the Bk Toner Bottle reaches the settings value
(%), alarm [10-0020 (Bk)] is sent.
Use case When changing the timing to notify the end of life according to the
usage status
Adj/set/operate method Enter the setting value, and then press OK key.
Caution
Since toner level is calculated based on the developing supply count,
some errors may occur.
Display/adj/set range 0 to 40
Unit %
Default value EUR: 5, Other:10
Related service mode COPIER > OPTION > FNC-SW > T-DLV-CL
T-DLV-CL Pre-toner low alarm send timing:CL toner
Lv.2 Details To set the remaining toner level to send the pre-toner low alarm.
When the toner level in the Y/M/C Toner Bottle reaches the settings
value (%), alarm [10-0017 (Y), 0018 (M), 0019 (C)] is sent.
Use case When changing the timing to notify the end of life according to the
usage status
Adj/set/operate method Enter the setting value, and then press OK key.
Caution
Since toner level is calculated based on the developing supply count,
some errors may occur.
Display/adj/set range 0 to 40
Unit %
Default value 5
Related service mode COPIER > OPTION > FNC-SW > T-DLV-BK
JM-ERR-D Handling 0CAX jam as an error: DCON
Lv.2 Details To display 0CAX jam as the error E996-0CAF.
By handling the jam as an error, the machine stops, so that loss of the
log can be prevented.
Be sure to enable the service mode at the user’s site where 0CAX jam
occurs.
After that, if the error E996-0CAX occurs, the log which has been
backed up can be obtained.
Use case When obtaining a log at the occurrence of 0CAX jam
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range
0: Display as a jam, 1: Display as an error
Default value 0