Canon imageRUNNER ADVANCE C5255, Руководство по обслуживанию, Страница: 734 / 1443

7
7
7-43
7-43
Error•Jam•Alarm > Error Code > Error Code Details
Error•Jam•Alarm > Error Code > Error Code Details
E
code
Detailed
code
Occurance
area
Items Description
E530 8002 05 Title Front aligning plate home position error
Description The aligning plate does not return to aligning plate front
home position sensor when the alignment plate front
motor has been driven for 4 seconds.
Remedy 1. The front aligning plate home position sensor (PI106)
is faulty.
2. The wiring between the finisher controller PCB and
front aligning plate motor is faulty.
3. The front aligning plate is faulty.
4. The front aligning plate motor (M103) is faulty.
5. The finisher controller PCB is faulty.
E531 8001 05 Title Staple home position error
Description Stapler fails to move from the staple home position
although the Staple Motor is driven for a specified period
of time.
Remedy 1. The wiring between the finisher controller PCB and
stapler is faulty.
2. The stapler is faulty.
3. The finisher controller PCB is faulty.
E531 8002 05 Title Staple home position error
Description Stapler fails to move from the staple home position
although the Staple Motor is driven for a specified period
of time.
Remedy 1. The wiring between the finisher controller PCB and
stapler is faulty.
2. The stapler is faulty.
3. The finisher controller PCB is faulty.
E532 0001 05 Title STP Move Motor fails to return to HP
Description At initial rotation, when the Motor rotates for specified
period of time and cannot return to HP, it is detected as
an error if the same symptom occurs again after the first
retry.
Remedy 1. Check if the Motor (M1) Connector is physically
removed.
2. Check if the Motor failure occurs.
3. Check if the Stapler Move HP Sensor (S10) Connector
is physically removed.
4. Check if the Stapler Move HP Sensor (S10) failure
occurs.
E
code
Detailed
code
Occurance
area
Items Description
E532 0002 05 Title STP Move Motor fails to move from HP
Description At initial rotation, when the Motor rotates for specified
period of time and cannot move from HP, it is detected as
an error if the same symptom occurs again after the first
retry.
Remedy 1. Check if the Motor (M1) Connector is physically
removed.
2. Check if the Motor failure occurs.
3. Check if the Stapler Move HP Sensor (S10) Connector
is physically removed.
4. Check if the Stapler Move HP Sensor (S10) failure
occurs.
E532 8001 05 Title Stapler shift home position error
Description The stapler does not leave the stapler shifthome position
when the stapler shift motor hasbeen driven for 5
seconds.
Remedy 1. The stapler drive home position sensor (PI110) is
faulty.
2. The wiring between the finisher controller PCB and
stapler shift motor is faulty.
3. The stapler shift base is faulty.
4. The stapler shift motor (M105) is faulty.
5. The finisher controller PCB is faulty.
E532 8002 05 Title Stapler shift home position error
Description The stapler does not return to the stapler shift home
position when the stapler shift motor has been driven for
20 seconds.
Remedy 1. The stapler drive home position sensor (PI110) is
faulty.
2. The wiring between the finisher controller PCB and
stapler shift motor is faulty.
3. The stapler shift base is faulty.
4. The stapler shift motor (M105) is faulty.
5. The finisher controller PCB is faulty.
E535 8001 05 Title Swing home position error
Description The stapler does not leave the swing home position when
the swing motor has been driven for 3 seconds.
Remedy 1. The swing home position sensor (PI105) is faulty.
2. The wiring between the finisher controller PCB and
swing motor is faulty.
3. The swing mechanism is faulty.
4. The swing motor (M106) is faulty.
5. The finisher controller PCB is faulty.