Canon imageRUNNER ADVANCE C5255, Руководство по обслуживанию, Страница: 955 / 1443

8
8
8-135
8-135
Service Mode > COPIER > FUNCTION > DPC
Service Mode > COPIER > FUNCTION > DPC
■
DPC
COPIER > FUNCTION > DPC
DRMRSETY Forcible exe of Y Drum replacement mode
Lv.1 Details To execute the same operation as warm-up rotation forcibly.
At this time, laser power values, etc., that were corrected according
to Y drum counter, total charging time, target Vd values for potential
control and drum durability are reset.
Use case - When detection of the Drum Unit replacement has failed
- When installing a Drum Unit used in other machine for a while as a
dummy unit and then using it continuously
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
When the drum replacement mode is enabled, it becomes disabled
automatically after execution.
Caution Be sure to execute this item only when installing a Drum Unit used
in other machine for a while as a dummy unit and then using it
continuously. Be sure not to execute this item when temporarily using
a dummy unit for checking.
Display/adj/set range None
Required time 2 min
Related service mode COPIER> FUNCTION> DPC> DRM-RSET, DRMRSETM,
DRMRSETC, DRMRSETK
DRMRSETM Forcible exe of M Drum replacement mode
Lv.1 Details To execute the same operation as warm-up rotation forcibly.
At this time, laser power values, etc., that were corrected according
to M drum counter, total charging time, target Vd values for potential
control and drum durability are reset.
Use case - When detection of the Drum Unit replacement has failed
- When installing a Drum Unit used in other machine for a while as a
dummy unit and then using it continuously
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
When the drum replacement mode is enabled, it becomes disabled
automatically after execution.
Caution Be sure to execute this item only when installing a Drum Unit used
in other machine for a while as a dummy unit and then using it
continuously. Be sure not to execute this item when temporarily using
a dummy unit for checking.
Display/adj/set range None
Required time 2 min
Related service mode COPIER> FUNCTION> DPC> DRM-RSET, DRMRSETY,
DRMRSETC, DRMRSETK
COPIER > FUNCTION > DPC
DRMRSETC Forcible exe of C Drum replacement mode
Lv.1 Details To execute the same operation as warm-up rotation forcibly.
At this time, laser power values, etc., that were corrected according
to C drum counter, total charging time, target Vd values for potential
control and drum durability are reset.
Use case - When detection of the Drum Unit replacement has failed
- When installing a Drum Unit used in other machine for a while as a
dummy unit and then using it continuously
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
When the drum replacement mode is enabled, it becomes disabled
automatically after execution.
Caution Be sure to execute this item only when installing a Drum Unit used
in other machine for a while as a dummy unit and then using it
continuously. Be sure not to execute this item when temporarily using
a dummy unit for checking.
Display/adj/set range None
Required time 2 min
Related service mode COPIER> FUNCTION> DPC> DRM-RSET, DRMRSETY,
DRMRSETM, DRMRSETK
DRMRSETK Forcible exe of Bk Drum replacement mode
Lv.1 Details To execute the same operation as warm-up rotation forcibly.
At this time, laser power values, etc., that were corrected according
to Bk drum counter, total charging time, target Vd values for potential
control and drum durability are reset.
Use case - When detection of the Drum Unit replacement has failed
- When installing a Drum Unit used in other machine for a while as a
dummy unit and then using it continuously
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
When the drum replacement mode is enabled, it becomes disabled
automatically after execution.
Caution Be sure to execute this item only when installing a Drum Unit used
in other machine for a while as a dummy unit and then using it
continuously. Be sure not to execute this item when temporarily using
a dummy unit for checking.
Display/adj/set range None
Required time 2 min
Related service mode COPIER> FUNCTION> DPC> DRM-RSET, DRMRSETY,
DRMRSETM, DRMRSETC
T-8-40