Canon imageRUNNER ADVANCE C5255, Руководство по обслуживанию, Страница: 248 / 1443

2
2
2-210
2-210
Technology > Embedded RDS > E-RDS Setup > Steps to Service Call button settings
Technology > Embedded RDS > E-RDS Setup > Steps to Service Call button settings
NOTE:
When the function is enabled, the [Service Call] button is displayed on the Monitoring
Service screen by touching the [Monitoring Service] button on the Check Counter
screen.
● Steps for settings of service call completion
When the service technician completes the work for the service call, follow the instruction as
described below to execute the service call completion work.
1. Start [Service Mode] at Level 1.
2. Select [COPIER] > [Option] > [USER] > [SCALLCMP].
3. Touch the numeric button [1] or [0] on the control panel (the setting value is changed to 1
or 0) and touch the [OK] button. (The data is reflected to the setting value field.)
NOTE:
E-RDS generates an alarm of service call completion at this timing, and sends the
alarm to UGW.
NOTE:
In the current condition, touching the [OK] button completes the service call regardless
of whether 0 or 1 is set.
F-2-382
F-2-383