Canon imageRUNNER ADVANCE C5255, Руководство по обслуживанию, Страница: 737 / 1443

7
7
7-46
7-46
Error•Jam•Alarm > Error Code > Error Code Details
Error•Jam•Alarm > Error Code > Error Code Details
E
code
Detailed
code
Occurance
area
Items Description
E542 8002 05 Title Tray 2 shift area error
Description The upper limit area is reached before the tray 2 paper
surface sensor 1 detects the paper surface during paper
surface detection operation.
A discontinuous area is detected during tray operation.
During evacuation operation, arrival at the area beyond
the tray 2 paper surface sensor 2 is detected before this
sensor detects paper surface.
Remedy 1. The tray 2 shift area sensor PCB is faulty.
2. The wiring between the finisher controller PCB and
tray 2 shift motor is faulty.
3. The tray up/down mechanism is faulty.
4. The tray 2 shift motor (M105) is faulty.
5. The finisher controller PCB is faulty.
E542 8004 05 Title The tray 2 shift motor clock error
Description The FG input cannot be detected when the tray 2 shift
motor has been driven for 0.2 second.
Remedy 1. The Tray 2 shift area sensor PCB is faulty.
2. The wiring between the finisher controller PCB and
tray 2 shift motor is faulty.
3. The tray up/down mechanism is faulty.
4. The Tray 2 shift motor (M105) is faulty.
5. The finisher controller PCB is faulty.
E542 8005 05 Title The tray 2 shift motor speed error
Description The lock detection signal turns OFF 150 ms after the lock
detection signal turned ON.
Remedy 1. The tray 2 shift area sensor PCB is faulty.
2. The wiring between the finisher controller PCB and
tray 2 shift motor is faulty.
3. The tray up/down mechanism is faulty.
4. The tray 2 shift motor (M105) is faulty.
5. The finisher controller PCB is faulty.
E542 8006 05 Title The tray 2 shift motor acceleration error
Description The lock detection signal does not turn ON when the tray
2 shift motor has been driven for 1 second.
Remedy 1. The tray 2 shift area sensor PCB is faulty.
2. The wiring between the finisher controller PCB and
tray 2 shift motor is faulty.
3. The tray up/down mechanism is faulty.
4. The tray 2 shift motor (M105) is faulty.
5. The finisher controller PCB is faulty.
E
code
Detailed
code
Occurance
area
Items Description
E542 8007 05 Title The tray 2 shift motor error
Description The lock detection signal does not turn OFF when the
tray 2 shift motor is at a stop.
Remedy 1. The tray 2 shift area sensor PCB is faulty.
2. The wiring between the finisher controller PCB and
tray 2 shift motor is faulty.
3. The tray up/down mechanism is faulty.
4. The tray 2 shift motor (M105) is faulty.
5. The finisher controller PCB is faulty.
E567 0001 05 Title Shift Roller Release Motor fails to move from HP
Description At initial rotation, when the Motor rotates for specified
period of time and cannot move from HP, it is detected as
an error if the same symptom occurs again after the first
retry.
Remedy 1. Check if the Motor (M5) Connector is physically
removed.
2. Check if the Motor failure occurs.
3. Check if the Shift Roller Release Sensor (S3)
Connector is physically removed.
4. Check if the Shift Roller Release Sensor (S3) failure
occurs.
E567 0002 05 Title Shift Roller Release Motor fails to return to HP
Description At initial rotation, when the Motor rotates for specified
period of time and cannot return to HP, it is detected as
an error if the same symptom occurs again after the first
retry.
Remedy 1. Check if the Motor (M5) Connector is physically
removed.
2. Check if the Motor failure occurs.
3. Check if the Shift Roller Release Sensor (S3)
Connector is physically removed.
4. Check if the Shift Roller Release Sensor (S3) failure
occurs.
E56F 0001 05 Title Entrance Roller Release/Stopper HP Motor fails to move
from HP
Description At initial rotation, when the Motor rotates for specified
period of time and cannot move from HP, it is detected as
an error if the same symptom occurs again after the first
retry.
Remedy 1. Check if the Motor (M6) Connector is physically
removed.
2. Check if the Motor failure occurs.
3. Check if the Entrance Roller Release/Stopper HP
Sensor (S5) Connector is physically removed.
4. Check if the Entrance Roller Release/Stopper HP
Sensor (S5) failure occurs.