Canon imageRUNNER ADVANCE C5255, Руководство по обслуживанию, Страница: 974 / 1443

8
8
8-154
8-154
Service Mode > COPIER > OPTION > FNC-SW
Service Mode > COPIER > OPTION > FNC-SW
COPIER > OPTION > FNC-SW
PSCL-MS Set of auto gradation adjustment: Heavy
Lv.1 Details To set at which speed (1/1 speed, 1/2 speed, or 1/3 speed) PASCAL
control and D-half control are executed at auto gradation adjustment.
When 2 is set, it is executed only for the lastly used speed only. The
time required for auto gradation adjustment is short, but switching to
another speed takes time. This is suitable for the users who frequently
use a specific paper type.
When 3 is set, it is executed for all speeds. The time required for auto
gradation adjustment is long (approx. 3 minutes), but switching to
another speed is quick. This is suitable for the users who use various
paper types.
Use case When setting the speed according to the materials used by the user
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 2 to 3
2: Lastly used speed, 3: All speed
Default value 2
DMX-DISP ON/OFF auto grdtn adj D-max PASCAL ctrl
Lv.1 Details To set whether to execute D-max PASCAL control at full adjustment of
auto gradation adjustment.
When 0 is set, D-max PASCAL control and PASCAL control are
executed. Four A4-size sheets are used for test prints (one for D-max
PASCAL control and three for PASCAL control).
When 1 is set, PASCAL control (gradation adjustment) only is
executed. Three A4-size sheets are used for test prints (for PASCAL
control).
Use case When making the setting according to the usage of the user
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: ON, 1: OFF
Default value 0
STND-PNL Not used
INVALPDL Disabling PDL license
Lv.1 Details To disable the registered PDL license.
When “1: Disabled” is set, PDL is disabled even if a PDL license is
registered. This is set to the machines installed at convenience stores,
which do not allow PDL to be used.
Use case When prohibiting the use of PDL
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Registered PDL license is enabled, 1: Disabled
Default value 0
COPIER > OPTION > FNC-SW
IMGCNTPR Setting of image quality mode
Lv.1 Details To set the image quality mode.
The counter priority mode is applied when 1 is set, and the image
quality priority mode is applied when 0 is set.
Use case Upon user’s request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Image quality priority mode, 1: Counter priority mode
Default value 1
CDS-FIRM Set to allow firmware update by admin
Lv.1 Details To set whether to allow the user (administrator) to perform firmware
update linked with CDS and collection of log files.
When 1 is set, “Deliver Update” is added to remote UI, and “Firmware
Update” is added to the Register/Update Software menu of local UI.
Log files can be collected from remote UI.
Use case When allowing the administrator to update the firmware and collect log
files
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution Do not use it for purposes other than collecting log files. In Japan, the
firmware cannot be updated by user. Be sure to return the value to 0
after use.
Display/adj/set range 0 to1
0: Disabled, 1: Enabled
Default value EUR: 1, Other: 0
CDS-MEAP Set to allow MEAP installation by admin
Lv.1 Details To set whether to permit the user (administrator) to install MEAP
applications and enable iR options from CDS.
When “1: Enabled” is set, Updater can be activated from the user mode.
Use case When allowing the administrator to install MEAP applications and
enable iR options from CDS
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to1
0: Disabled, 1: Enabled
Default value 1
CDS-UGW Set to allow firmware update from UGW
Lv.1 Details To set whether to permit update of the firmware from the UGW server.
When “1: Enabled” is set, Updater accepts the operation from the
UGW server in cooperation with CDS.
Use case When allowing update of the firmware from the UGW server
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to1
0: Disabled, 1: Enabled
Default value 0