Canon imageRUNNER ADVANCE C5255, Руководство по обслуживанию, Страница: 1024 / 1443

8
8
8-204
8-204
Service Mode > COPIER > OPTION > USER
Service Mode > COPIER > OPTION > USER
COPIER > OPTION > USER
FAXSTREN Set of setting delete aftr fax transmit
Lv.2 Details To set whether to delete the transmission settings except for the address
after transmission from the “Fax” screen.
Use case Upon user’s request
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Delete, 1: Retain
Default value JP: 1, USA, EUR, AU, CN, KR, TW, ASIA: 0
CNCL-ATH ON/OFF of auth at secured job stop
Lv.1 Details To improve the security of secured job by conducting authentication at
stopping of a secured job when user authentication is not performed.
Use case When changing the operation specification of secured print upon user’s
request
Adj/set/operate method Enter the setting value, and then press OK key.
Display/adj/set range 0 to 1
0:OFF,1:ON
Default value 0
PRTDP-SW Delivery side set for 2-sided 1-page job
Lv.1 Details To set the delivery side for 2-sided jobs of only 1 page.
Use case When setting face-down delivery or face-up delivery for 2-sided jobs of 1
page
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Face-down delivery, 1: Face-up delivery
Default value 0
SJ-UNMSK ON/OFF secured job masking cancellation
Lv.2 Details To set whether to mask other people's secured jobs.
When 0 is set, operation is not possible because other people's secured
jobs are masked.
When COIN is set to 6 or 7 (charge mode: Type-C), set 1. Masking is
canceled and other people's secured jobs can be operated.
It is enabled at MEAP authentication.
Use case When operating secured jobs in charge mode Type-C
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: OFF (Masking enabled), 1: ON (Masking canceled)
Default value 0
Related service mode COPIER> OPTION> ACC> COIN
COPIER > OPTION > USER
SJ-CLMSK ON/OFF secured job stop button display
Lv.2 Details To set whether to display the button to stop a secured job.
When 0 is set, the stop button is displayed.
When COIN is set to 6 or 7 (charge mode: Type-C), set 1. Since the
stop button is not displayed, the secured job cannot be stopped.
Use case When prohibiting to stop the secured job in charge mode Type-C
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: OFF (Display), 1: ON (Hide)
Default value 0
Related service mode COPIER> OPTION> ACC> COIN
FMTMH2M [For customization]
T-8-64