Canon imageRUNNER ADVANCE C5255, Руководство по обслуживанию, Страница: 1193 / 1443

9
9
9-123
9-123
Installation > Serial Interface Kit-K1/K2 / Copy Control Interface Kit-A1 > Installation Procedure > Installing the Copy Control Interface Kit-A1
Installation > Serial Interface Kit-K1/K2 / Copy Control Interface Kit-A1 > Installation Procedure > Installing the Copy Control Interface Kit-A1
■ Installing the Copy Control Interface Kit-A1
1) Remove the Face Cover from the Main Controller PCB 1. (Removed Face Cover is not
used.)
• 2 Screws (Removed screws are not used.)
x2
2) Clean the affixing side (Controller Box Frame) with lint-free paper moistened with alcohol.
3) Affix the IA Harness Protection Sheet to the Main Controller PCB 1.
NOTE:
• Because the working space is limited, use scale, etc. for cleaning.
• After affixing the I Harness Protection Sheet, be sure to press it with scale, etc. to prevent
coming off.
Affixing Side
F-9-326
F-9-327
4) Put the CC-VI cable through the D-SUB Support Plate.
D-SUB Support Plate
CC-VI Cable
Inside
5) Secure the CC-VI cable to the Main Controller PCB 1.
• 2 Hexagonal Screws
• 2 Washers (small)
• 2 Washers (large)
• 1 Connector
Washers (Small)
Hexagonal Screw
CC-VI Cable
Washers (large)
x2
F-9-328
F-9-329