manualshive.com logo in svg

Canon imageRUNNER ADVANCE C5255, Руководство по обслуживанию, Страница: 573 / 1443

Поделиться
Скачать
Canon imageRUNNER ADVANCE C5255 Скачать руководство пользователя страница 573

6

6

6-35

6-35

Troubleshooting > Version upgrade > Version Upgrade via SST > Downloading System Software (Single mode)

Troubleshooting > Version upgrade > Version Upgrade via SST > Downloading System Software (Single mode)

NOTE:

The following device information is shown at the right top of SST screen.

•  IP address

•  Model name

•  Download mode

4) Select the DCON version to be downloaded and click “Start” button.
Multiple files can be selected in this step.

F-6-42

NOTE: Download Confirmation Message Modes

Download is confirmed in any of the three message modes.

•  Skip the existing versions and confirm whether to download downgraded versions

Upgraded versions are downloaded without message.

Skip download of the existing versions.

Confirm whether to download downgraded versions.

•  Confirm whether to download the existing versions / downgraded versions

Upgraded versions are downloaded without message.

Confirm whether to download and overwrite the existing versions.

Confirm whether to download downgraded versions.

•  Overwrite all versions.

Regardless of version upgrade or downgrade, all versions of the system software are 

downloaded without message.

By default, “Skip the existing versions and confirm whether to download downgraded

5) When download is completed, click “OK” button.

The main menu is displayed.

F-6-43

Содержание imageRUNNER ADVANCE C5255




































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов