Canon imageRUNNER ADVANCE C5255, Руководство по обслуживанию, Страница: 765 / 1443

7
7
7-74
7-74
Error•Jam•Alarm > Error Code > Error Code Details
Error•Jam•Alarm > Error Code > Error Code Details
E
code
Detailed
code
Occurance
area
Items Description
E732 0021 00 Title Scanner communication error
Description A communication error between the Reader Controller
PCB and the Main Controller PCB 2 was detected at
startup/recovery from sleep.
Remedy [Related parts]
- Harness between the Main Controller PCB 2 (J3003)
and the Reader Controller PCB (PCB1/J109) (Unit of
replacement: CABLE, INTERFACE)
- Harnesses from the Relay PCB to the Reader Controller
PCB
1. Relay PCB (UN5/J426) to Relay Connector (6P) (Unit
of replacement: CABLE, DC POWER SUPPLY)
2. Relay Connector (6P) to Reader Controller PCB (PCB1/
J101) (Unit of replacement: CABLE, READER POWER
SUPPLY)
- Main Controller PCB 2 (Unit of replacement: MAIN
CONTROLLER PCB ASS'Y, 2)
- Reader Controller PCB (PCB1) (Unit of replacement:
READER CONTROLLER PCB ASSEMBLY)
- Relay PCB (UN5) (Unit of replacement: RELAY PCB
ASSEMBLY)
[Remedy]
1. Check (connection and conduction state of)/replace
the related harness/cable, connector and parts.
2. If the error is not cleared, collect debug log (Sublog)
and contact to the sales company.
[Reference]
- If the cause of the error cannot be identified by
analyzing Sublog, it may require investigation separately.
- Before replacing the Reader Controller PCB, back up
the service mode data (approx. 2 min) and restore the
backup data after the replacement so the data may be
able to be protected.
- Backup: COPIER (LEVEL2)> FUNCTION> SYSTEM>
RSRAMBUP
- Restoration: COPIER (LEVEL2)> FUNCTION>
SYSTEM> RSRAMRES
E
code
Detailed
code
Occurance
area
Items Description
E732 0022 00 Title Scanner communication error
Description A communication error between the Reader Controller
PCB and the Main Controller PCB 2 was detected at
startup/recovery from sleep.
Remedy [Related parts]
- Harness between the Main Controller PCB 2 (J3003)
and the Reader Controller PCB (PCB1/J109) (Unit of
replacement: CABLE, INTERFACE)
- Harnesses from the Relay PCB to the Reader Controller
PCB
1. Relay PCB (UN5/J426) to Relay Connector (6P) (Unit
of replacement: CABLE, DC POWER SUPPLY)
2. Relay Connector (6P) to Reader Controller PCB (PCB1/
J101) (Unit of replacement: CABLE, READER POWER
SUPPLY)
- Main Controller PCB 2 (Unit of replacement: MAIN
CONTROLLER PCB ASS'Y, 2)
- Reader Controller PCB (PCB1) (Unit of replacement:
READER CONTROLLER PCB ASSEMBLY)
- Relay PCB (UN5) (Unit of replacement: RELAY PCB
ASSEMBLY)
[Remedy]
1. Check (connection and conduction state of)/replace
the related harness/cable, connector and parts.
2. If the error is not cleared, collect debug log (Sublog)
and contact to the sales company.
[Reference]
- If the cause of the error cannot be identified by
analyzing Sublog, it may require investigation separately.
- Before replacing the Reader Controller PCB, back up
the service mode data (approx. 2 min) and restore the
backup data after the replacement so the data may be
able to be protected.
- Backup: COPIER (LEVEL2)> FUNCTION> SYSTEM>
RSRAMBUP
- Restoration: COPIER (LEVEL2)> FUNCTION>
SYSTEM> RSRAMRES
E732 0023 00 Title Scanner communication error
Description A communication error between the Reader Controller
PCB and the Main Controller PCB 2 was detected at
startup/recovery from sleep.