Canon imageRUNNER ADVANCE C5255, Руководство по обслуживанию, Страница: 220 / 1443

2
2
2-182
2-182
Technology > MEAP > Formatting and Replacing the HDD > Collection of MEAP Console Logs
Technology > MEAP > Formatting and Replacing the HDD > Collection of MEAP Console Logs
4) Press the 0 key on the control panel keypad to change the setting to '0'; then, press [OK]
button.
5) Start service mode again after rebooting the device, and check that the displayed setting
value has changed to "0" and that [MPSF] is no longer displayed at the upper left of the
screen.
F-2-313
F-2-314
■
Collection of MEAP Console Logs
● Overview
When debugging a MEAP application, console logs need to be collected in some cases.
The following shows how to collect MEAP console logs using commercially available terminal
software and service mode.
● What to Prepare
• PC connected with the same network as the device
• Commercially available terminal software
Note:
In the procedure shown in this manual, "Tera Term Pro" and "Hyper Terminal" are used
as the terminal software.
● Work Procedure
Device Setting Procedure
1) Start [ SERVICE MODE ] in Level 1.
2) Press [ COPIER ] > [ Option ] > [ DSPLY-SW ] buttons.
F-2-315