Canon imageRUNNER ADVANCE C5255, Руководство по обслуживанию, Страница: 1005 / 1443

8
8
8-185
8-185
Service Mode > COPIER > OPTION > IMG-FIX
Service Mode > COPIER > OPTION > IMG-FIX
COPIER > OPTION > IMG-FIX
FXS-TMP2 ITOP control temperature: Heavy paper 1
Lv.1 Details To set the offset of ITOP control temperature for heavy paper 1 (106 to
163 g/m2).
As the value is incremented by 1, the control temperature is increased
by 5 deg C.
Use case When uneven gloss occurs on the leading edge (94mm) of heavy
paper 1
Adj/set/operate method 1) Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range -2 to 2
-2: -10 deg C, -1: -5 deg C, 0: 0 deg C, 1: +5 deg C, 2: +10 deg C
Unit deg C
Default value 0
FXS-TMP3 ITOP control temperature: Heavy paper 2
Lv.1 Details To set the offset of ITOP control temperature for heavy paper 2 (164 to
209 g/m2).
As the value is incremented by 1, the control temperature is increased
by 5 deg C.
Use case When uneven gloss occurs on the leading edge (94mm) of heavy
paper 2
Adj/set/operate method 1) Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range -2 to 2
-2: -10 deg C, -1: -5 deg C, 0: 0 deg C, 1: +5 deg C, 2: +10 deg C
Unit deg C
Default value 0
FXS-TMP4 ITOP control temperature: Heavy paper 3
Lv.1 Details To set the offset of ITOP control temperature for heavy paper 3 (210 to
256 g/m2).
As the value is incremented by 1, the control temperature is increased
by 5 deg C.
Use case When uneven gloss occurs on the leading edge (94mm) of heavy
paper 3
Adj/set/operate method 1) Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range -2 to 2
-2: -10 deg C, -1: -5 deg C, 0: 0 deg C, 1: +5 deg C, 2: +10 deg C
Unit deg C
Default value 0
COPIER > OPTION > IMG-FIX
FXS-TMP5 ITOP control temperature: Thin ppr
Lv.1 Details To set the offset of ITOP control temperature for thin paper.
As the value is incremented by 1, the control temperature is increased
by 5 deg C.
Use case When uneven gloss occurs on the leading edge (94mm) of thin paper
Adj/set/operate method 1) Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range -2 to 2
-2: -10 deg C, -1: -5 deg C, 0: 0 deg C, 1: +5 deg C, 2: +10 deg C
Unit deg C
Default value 0
FXS-TMP6 ITOP control temperature: Envelope
Lv.1 Details To set the offset of ITOP control temperature for envelope.
As the value is incremented by 1, the control temperature is increased
by 5 deg C.
Use case When uneven gloss occurs on the leading edge (94mm) of envelope
Adj/set/operate method 1) Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range -2 to 2
-2: -10 deg C, -1: -5 deg C, 0: 0 deg C, 1: +5 deg C, 2: +10 deg C
Unit deg C
Default value 0
FXST2-N2 Set of ITOP wait time:Plain ppr in LL Ev
Lv.1 Details To set initial rotation time when plain paper 1/plain paper 2 is fed with a
temperature of 18 deg C or lower.
Increase the value when a fixing failure occurs.
Use case When fixing failure occurs in an LL environment
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 20
Unit sec
Default value 0
FXST2-UH Set of ITOP wait time:Heavy ppr in LL Ev
Lv.1 Details To set initial rotation time when heavy paper 1/2/3 is fed with a
temperature of 18 deg C or lower.
Increase the value when a fixing failure occurs.
Use case When fixing failure occurs in an LL environment
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 30
Unit sec
Default value 0