manualshive.com logo in svg

Canon imageRUNNER ADVANCE C5255, Руководство по обслуживанию, Страница: 1158 / 1443

Поделиться
Скачать
Canon imageRUNNER ADVANCE C5255 Скачать руководство пользователя страница 1158

9

9

9-88

9-88

Installation > Voice Operation Kit C2 > Operation Check > To stop the use

Installation > Voice Operation Kit C2 > Operation Check > To stop the use

25) 

Fix the DVI Cable to the 2 Wire Saddles

NOTE: When using in combination with the Copy Card Reader

•  Secure the Card Reader External Relay Harness in place together with the DVI Cable 

using the Wire Saddle [A] included in the package of Voice Operation Kit.

•  Even when used in combination with the Card Reader, the routing of the cable is same.

[A]

F-9-226

F-9-225

Setting Check

NOTE:

When changing the settings upon user’s request, it is required to log in as a system 

manager in accordance with instructions from the user administrator.

1) Connect the power plug of the host machine to the power outlet.
2) Open the switch cover and turn ON the main power switch.
3) [Settings/Registration] > [Preferences] > [Accessibility] > [Voice Navigation Settings] > and 

make sure that [Use Voice Navigation] is [ON].

4) [Settings/Registration] > [Preferences] > [Accessibility] > [Voice Navigation Settings] > [Voice 

Navigation at Startup] and make sure that is [Select Mode at Startup] set.

5) [Settings/Registration] > [Preferences] > [Accessibility] > [Voice Navigation Settings] > and 

make sure that [Tune Microphone] is displayed.

Operation Check

 

■

When using

1) Press Reset Key and Voice Recognition Button for 3 secs or more.
2) In the operation screen [Voice Navigation], select one of the following: [Vocal 

Mode/Vocal Mode/Manual Mode], and press OK.

3) The display in Panel Screen, if the display in panel screen is boxed with red frame, “Voice 

Guidance Kit” is available.

NOTE:

If [Manual Mode] is selected in [Voice Navigation], nothing is going to happen even if 

Voice Recognition Button is pressed.

If “Voice Guidance Kit” doesn’t properly operate, check the below.
•  Enter Service Mode (Level 1) > COPIER > DISPLAY > VERSION, and check whether 

languages to be used for TTS-JA/TTS-EN/TTS-IT/TTS-FR/TTS-DE are properly installed.

•  Enter Service Mode (Level 1) > COPIER > DISPLAY > VERSION, and check whether ASR-

JA/ASR-EN is properly installed.

 

■

To stop the use

1) Press the Reset Key for 3 secs or more.

Содержание imageRUNNER ADVANCE C5255




































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов