Canon imageRUNNER ADVANCE C5255, Руководство по обслуживанию, Страница: 225 / 1443

2
2
2-187
2-187
Technology > MEAP > Formatting and Replacing the HDD > Using USB Devices
Technology > MEAP > Formatting and Replacing the HDD > Using USB Devices
8) Perform the operation whose log you want to collect.
9) Select [Transfer] > [Capture Text...] > [Stop] from the menu.
10) Open the file saved in the save destination, and check that the logs are stored correctly.
Note:
Depending on the MEAP application, the log output setting needs to be made in order
to collect logs.
CAUTION:
After collecting logs, the remote console function of the device needs to be disabled
(select [SERVICE MODE] LEVEL1 > [COPIER] > [Option] > [DSPLY-SW] > [RMT-CNSL]
> 0, and restart the device).
F-2-337
F-2-338
F-2-339
■
Using USB Devices
● USB Driver
Two types of USB drivers
While the USB driver that can be used in iR series is only the USB driver designed exclusively
for MEAP application (hereinafter referred to as “MEAP driver”), not only MEAP driver but
also USB system driver (hereinafter referred to as “system driver”) can be used in iR-ADV
series.
System driver and MEAP driver cannot be used together. When either of them is used, the
other driver cannot be used.
USB driver setting (iR-ADV series):
System driver is active by default in iR-ADV series.
The driver can be changed in Settings/Registration (user mode).
Usually, It is not necessary to change the setting because it is specified in the MEAP
application side.
Only in the case of a special MEAP application, it is necessary to change the USB driver
setting.
For details, refer to specifications of MEAP application side.
F-2-340