manualshive.com logo in svg

Canon imageRUNNER ADVANCE C5255, Руководство по обслуживанию, Страница: 606 / 1443

Поделиться
Скачать
Canon imageRUNNER ADVANCE C5255 Скачать руководство пользователя страница 606

6

6

6-68

6-68

Troubleshooting > Version upgrade > Version Upgrade via CDS > b. UGW-linked Download (Remote Distribution Update)

Troubleshooting > Version upgrade > Version Upgrade via CDS > b. UGW-linked Download (Remote Distribution Update)

5. Confirm the downloaded firmware and press [Yes] button.

6. The firmware is applied to the device. The device is automatically restarted when the 

firmware is successfully applied.

7. When the device is restarted, confirm the version of the firmware.

1). Press [Check Counter Key] button on the control panel.
2). Press [Check Device Configuration] button.
3). Confirm if the updated firmware version corresponds to [Controller Version].

Now the firmware is successfully updated in the method of “Manual Download and Update”.

F-6-109

CAUTION:
[Devices without Wait for EOJ (end of job) Function]
•  Firmware update will delete print jobs in the queue. Ensure to notify users of this 

before you start updating. It is recommended to perform firmware update during non-
business hours.

[Devices with Wait for EOJ Function]
•  Firmware update will not be triggered when any of the following jobs remains in the 

queue.

-Print

-Scan

-Fax (except I-FAX; this function is enabled for I-FAX only during Print/Scan operation)

See Chapter 1 “Limitations and Cautions“ of this manual for more detailed information.

NOTE:

To contacts registered for E-mail notification on UGW, the E-mail is sent from UGW 

upon completing firmware update.

Содержание imageRUNNER ADVANCE C5255




































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов