Canon imageRUNNER ADVANCE C5255, Руководство по обслуживанию, Страница: 932 / 1443

8
8
8-112
8-112
Service Mode > COPIER > ADJUST > HV-TR
Service Mode > COPIER > ADJUST > HV-TR
COPIER > ADJUST > HV-TR
2TR-T12 Sec trn ATVC ppr allot V:thin 1st,N-hmdy
Lv.1 Details To adjust the paper allotted voltage for the 1st side of thin paper in
secondary transfer ATVC control at normal humidity.
When transfer failure occurs on an image, adjust the value in the -30
to 30 (-900 to 900V) range in increments of 10 (30V).
When white dots occur on an image, the image failure can be
alleviated by adjusting the value in the -100 to -10 (-3000 to -300V)
range in increments of 10 (30V). However, if the value is too small,
transfer failure occurs.
Use case When adjusting the secondary transfer bias according to conditions
Adj/set/operate method Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
Caution Increase/decrease the value by 1 while checking the symptom each
time.
Display/adj/set range -128 to 127
Unit V
Default value 0
Related service mode COPIER> ADJUST> HV-TR> 2TR-N12
2TR-T22 Sec trn ATVC ppr allot V:thin 2nd,N-hmdy
Lv.1 Details To adjust the paper allotted voltage for the 2nd side of thin paper in
secondary transfer ATVC control at normal humidity.
When transfer failure occurs on an image, adjust the value in the -30
to 30 (-900 to 900V) range in increments of 10 (30V).
When white dots occur on an image, the image failure can be
alleviated by adjusting the value in the -100 to -10 (-3000 to -300V)
range in increments of 10 (30V). However, if the value is too small,
transfer failure occurs.
Use case When adjusting the secondary transfer bias according to conditions
Adj/set/operate method Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
Caution Increase/decrease the value by 1 while checking the symptom each
time.
Display/adj/set range -128 to 127
Unit V
Default value 0
Related service mode COPIER> ADJUST> HV-TR> 2TR-N22
COPIER > ADJUST > HV-TR
2TR-T13 Sec trn ATVC ppr allot V:thin 1st,H-hmdy
Lv.1 Details To adjust the paper allotted voltage for the 1st side of thin paper in
secondary transfer ATVC control at high humidity.
When transfer failure occurs on an image, adjust the value in the -30
to 30 (-900 to 900V) range in increments of 10 (30V).
Use case When adjusting the secondary transfer bias according to conditions
Adj/set/operate method Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
Caution Increase/decrease the value by 1 while checking the symptom each
time.
Display/adj/set range -128 to 127
Unit V
Default value 0
Related service mode COPIER> ADJUST> HV-TR> 2TR-N13
2TR-T23 Sec trn ATVC ppr allot V:thin 2nd,H-hmdy
Lv.1 Details To adjust the paper allotted voltage for the 2nd side of thin paper in
secondary transfer ATVC control at high humidity.
When transfer failure occurs on an image, adjust the value in the -30
to 30 (-900 to 900V) range in increments of 10 (30V).
When white dots occur on an image, the image failure can be
alleviated by adjusting the value in the -100 to -10 (-3000 to -300V)
range in increments of 10 (30V). However, if the value is too small,
transfer failure occurs.
Use case When adjusting the secondary transfer bias according to conditions
Adj/set/operate method Enter the setting value (switch negative/positive by -/+ key) and
press OK key.
Caution Increase/decrease the value by 1 while checking the symptom each
time.
Display/adj/set range -128 to 127
Unit V
Default value 0
Related service mode COPIER> ADJUST> HV-TR> 2TR-N23