manualshive.com logo in svg

Canon imageRUNNER ADVANCE C5255, Руководство по обслуживанию, Страница: 604 / 1443

Поделиться
Скачать
Canon imageRUNNER ADVANCE C5255 Скачать руководство пользователя страница 604

6

6

6-66

6-66

Troubleshooting > Version upgrade > Version Upgrade via CDS > b. UGW-linked Download (Remote Distribution Update)

Troubleshooting > Version upgrade > Version Upgrade via CDS > b. UGW-linked Download (Remote Distribution Update)

 

■

a. UGW-linked Download and Update (Full-remote Update)

See the figure below for the operational flow of “UGW-linked Download and Update”.

STEP 1

Scheduling

via UGW

STEP1: Scheduling via UGW

The firmware distribution schedule to the certain device should be set on UGW.
See “UGW-linked Download and Update” in chapter 5 of Operation Manual of Content 
Delivery System V1.0 for Firmware Distribution for details.

The device checks the schedule concerned every 12 hours on UGW. This allows the device 
to register the firmware distribution setting, enabling automatic firmware download and 
update.

CAUTION:
[Devices without Wait for EOJ (end of job) Function]
•  Firmware update will delete print jobs in the queue. Ensure to notify users of this 

before you start updating. It is recommended to perform firmware update during non-
business hours.

[Devices with Wait for EOJ Function]
•  Firmware update will not be triggered when any of the following jobs remains in the 

queue.

-Print

-Scan

-Fax (except I-FAX; this function is enabled for I-FAX only during Print/Scan operation)

See Chapter 1 “Limitations and Cautions“ of this manual for more detailed information.

NOTE:

To contacts registered for E-mail notification on UGW, the E-mail is sent from UGW 

upon completing firmware update.

F-6-104

 

■

b. UGW-linked Download (Remote Distribution Update)

See the figure below for the operational flow of “UGW-linked download”.

STEP 2

Update using 

Updater

STEP 1

Scheduling

via UGW

STEP 1: Scheduling via UGW

The firmware distribution schedule to the certain device should be set on UGW.
See “UGW-linked Download” in Operation Manual of Content Delivery System (for Firmware 
Distribution) for details.

NOTE:

The firmware downloaded by scheduling via UGW can be checked/deleted from User 

mode, but cannot be updated. If a user download the other firmware, the firmware 

downloaded with "UGW-linked Download" is overwritten.

STEP 2: Update using Updater

The firmware downloaded on the device can be updated using Updater functions.

1. Start [Service Mode] at Level 1.

F-6-105

Содержание imageRUNNER ADVANCE C5255




































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов