Canon imageRUNNER ADVANCE C5255, Руководство по обслуживанию, Страница: 970 / 1443

8
8
8-150
8-150
Service Mode > COPIER > OPTION > FNC-SW
Service Mode > COPIER > OPTION > FNC-SW
COPIER > OPTION > FNC-SW
INTROT-1 Ppr intvl/last rotn auto adj exe intvl
Lv.1 Details To set paper interval to execute discharge current control and primary
transfer ATVC at paper interval/last rotation.
As the value is incremented by 1, the interval is increased by 1 sheet.
Use case When matching the use environment of the user
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution As the number of sheets is increased (the interval is widened), image
failure tends to occur.
Display/adj/set range 50 to 1000
Unit sheet
Default value 125
INTROT-2 Set of last rotation auto adj exe intvl
Lv.1 Details To set the paper interval to execute auto adjustment (patch potential
control, D-max control, D-half control) at last rotation.
As the value is incremented by 1, the paper interval is increased by 1
sheet.
Use case When matching the use environment of the user
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution As the number of sheets is increased (the interval is widened), image
failure tends to occur.
Display/adj/set range 50 to 2000
Unit sheet
Default value 1000
INTROT-T [Not used]
BK-4CSW ON/OFF simple full color mode:photo mode
Lv.2 Details When outputting solid black image with black mode in text/photo
printout mode, 3.5 mm uneven pitch may occur. It may occur because
the ITB slips due to peripheral speed difference between the ITB and
Photosensitive Drum.
At this time, to set whether to use simple full color mode to create
black by using a small amount of Y, M and C toners.
In text/photo/map mode, it is output in black mode.
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: OFF, 1: ON
Default value 0
COPIER > OPTION > FNC-SW
MODELSZ2 Ppr size dtct global support in bookmode
Lv.2 Details To set ON/OFF for global support of document size detection in
copyboard reading mode.
Use case Upon user’s request (mixed media original with AB/Inch configuration)
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Caution - Do not use this at the normal service.
- The Document Size Sensor (Photo Sensor) is additionally required
to correctly detect the original size when the original consists of mixed
media (AB/Inch configuration).
Display/adj/set range 0 to 1
0: Detected with detection size according to location, 1: Detected with
AB/Inch mixed media.
Default value 0
DELV-FAN ON/OFF of condensation prevention mode
Lv.2 Details To set ON/OFF of condensation control mode.
By selecting 1, the Process Cartridge Fan (Front) (FM10) is turned
OFF when the internal temperature drops to 20 deg C or lower.
Use case When condensation occurs
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: OFF, 1: ON
Default value 1
SVMD-ENT Setting of entry method to service mode
Lv.2 Details To set the way to get in service mode to prevent information leak.
Use case As needed
Adj/set/operate method 1) Enter the setting value, and then press OK key.
2) Turn OFF/ON the main power switch.
Display/adj/set range 0 to 1
0: Factory default
1: [Settings/Registration] - Pressing [4] and [9] at the same time -
[Settings/Registration]
Default value 0