Canon imageRUNNER ADVANCE C5255, Руководство по обслуживанию, Страница: 1319 / 1443

9
9
9-249
9-249
Installation > [TYPE-6] > Execution of Auto Adjust Gradation
Installation > [TYPE-6] > Execution of Auto Adjust Gradation
Checking the Security Version
1) Press the Counter key (123 key) on the control panel.
2) Press the [Check Device Configuration] key appearing on the control panel.
3) Make sure that '2.00' or '2.01' is displayed in ‘Canon MFP Security Chip’ as version
information of the security chip.
When several Encryption Boards are installed, multiple version information is displayed.
CAUTION:
The user will be able to make sure that the encryption board fitted with a security chip
of the correct version with CC authentication is functioning normally by referring to the
version information indicated for ‘Canon MFP Security Chip’.
Checking the Security Mark
The user may check the security mark, appearing on the control panel when using the Host
machine to make sure that an appropriate level of security is being maintained.
The mark appears when the machine is equipped with an encryption board and the board is
operating correctly.
The Users Guide provides the following description in connection with the security mark:
<Confirming the Security Mark>
When the HDD Data Encryption & Mirroring Kit is operating normally, a security mark(
)
is displayed on the lower left corner of a panel screen.
Checking after Installation
1) Make sure that the LED blinks.
• HDD1 (Slot 1): The green LED blinks.
Reporting to the System Administrator at the End of the
Work
When you have completed all installation work, report to the system administrator for the
following:
At the point when installation is completed, make explanations about how to check that
the appropriate security function has been added and enabled so that, when the function
becomes uncontrolled, the system administrator can immediately detect the problem and
request <servicing work when a failure occurs>.
Completion of the Installation Work:
Ask the system administrator to make sure that '2.00' or '2.01' is indicated for ‘Canon MFP
Security Chip’ as the version information of the security chip by referring to the description
of Checking the Security Version.
Maintenance of the Security Functions:
Ask the system administrator to check the security mark to make sure that the security
functions are maintained each time the machine is started up by referring to the description
of Checking the Security Mark.
Execution of Auto Adjust Gradation
When this product is installed, the machine initializes its HDD, resetting the data used for
auto gradation adjustment.
Therefore be sure to execute auto gradation adjustment (full adjust) after installing this kit.