Canon imageRUNNER ADVANCE C5255, Руководство по обслуживанию, Страница: 1416 / 1443

9
9
9-346
9-346
Installation > [TYPE-11] > Installing the Removable HDD Kit > Installing the Encryption Board
Installation > [TYPE-11] > Installing the Removable HDD Kit > Installing the Encryption Board
10) Place the Controller Box to the original position. (2 Screws or 3 Screws)
11) Affix the Shutdown Caution Label in the appropriate language on the Right Rear
Cover 1. (Included in the Removable HDD Kit).
12) Install the removed cover and the cable.
• Rear Cover (2 Screws, 2 Rubber Caps)
• Left Rear Sub Cover (1 Screw)
• Reader Communication Cable (when reader is installed)
• Left Rear Cover (2 Screws, 2 Rubber Caps)
13) If Reader is installed, install the Reader Power Cable.
NOTE:
Handle the Reader Power Cable from the connector side and make a slack at [A] part.
Bend the Reader Power Cable at a right angle on [B] part.
F-9-930
x2
[B]
[A]
Connectors
Reader Power Cable
Cable Guide
Wire Saddles
x2
14) Install the Right Rear Cover 1. (3 Screws)
15) Affix the LED label so that it fits the edge of the Right Rear Cover 1.
Right Rear Cover 1
LED Label
16) Close the Right Rear Cover 1, Right Lower Cover, and Right Upper Cover.
17) Connect the power plug of the host machine to the power outlet.
F-9-931
F-9-932