Autodesk 256B1-05A761-1301 - AutoCAD Revit Structure Suite 2010, Руководство пользователя

Страница: 1053 / 1638

2 Click Home tab
➤
Room & Area panel
➤
Area drop-down
➤
Area Boundary Line.
3 Draw or pick the area boundaries. (Use Pick Lines to apply area rules.)
See the following procedures for details.
To pick area boundaries
1 Click Place Area Boundary tab
➤
Draw panel
➤
(Pick Lines).
2 If you do not want Revit Architecture to apply area rules, on the Options Bar, clear Apply Area
Rules, and specify the offset.
NOTE If you apply area rules, the area boundary position is dependent on the area type parameter
of the area tag. You must place an area tag in the boundary to change the area type.
3 Select the boundary defining walls.
To draw area boundaries
1 Click Place Area Boundary tab
➤
Draw panel, and select a sketch tool.
2 Use the sketch tools to complete the boundary.
See Sketching on page 303.
Areas and Area Tags
Areas and area tags are separate but related Revit Architecture components. Areas are model elements in
Revit Architecture, like walls and doors. Area tags are annotation elements that you can add to area plan
views.
When creating an early design, before you define walls or other bounding elements in a project, you can
create an area schedule. In the schedule, add information about the areas that you plan to use. Later, you
can place these predefined areas in an area plan of the project.
Related topics
■ Moving a Tag on page 986
■ Rotating a Tag on page 987
Creating an Area
You can create areas using 2 methods:
■ Add rows to an area schedule. This allows you to predefine areas in an early design of the project. See
Creating a Schedule or Quantity on page 173. You can later use the Area tool to place the predefined areas
in an area plan.
■ Use the Area tool in an area plan view, as follows.
To create an area
1 Open an area plan view.
See Area Plans on page 1009.
2 Create area boundaries.
See Area Boundaries on page 1010.
Areas and Area Tags | 1011