Autodesk 256B1-05A761-1301 - AutoCAD Revit Structure Suite 2010, Руководство пользователя

Страница: 1007 / 1638

Cut and Fill in a Schedule
You can create a topography schedule that includes cut, fill, and net cut/fill values. You should also name
the different surfaces to distinguish them in your schedule. See
Creating a Schedule or Quantity on page
173.
Cut and Fill Reporting with Building Pads
If you add a building pad to a graded surface, you will see cut and fill reported separately for the pad and
the toposurface in a topography schedule. This is because the pad divides the graded surface into 2 surfaces:
one is the surface under the pad (the graded surface), and one is the surface that is not under the pad (the
pad surface).
You should name both the graded surface and the pad surface to distinguish them in your schedule.
To select the surface under the pad, press Tab to highlight it, or turn off the pad's visibility. See Overriding
Visibility and Graphic Display of Individual Elements on page 199.
Building Pads
You can add a building pad to a toposurface and then modify the pad's structure and depth. You add a
building pad by sketching a closed loop on a toposurface. After sketching the pad, you can specify a value
to control the height offset from the level and other properties. You can define openings in the pad by
sketching closed loops inside the perimeter of the building pad, and you can define a slope for the building
pad.
The following image shows a section view of a building pad offset from the surface.
The following image shows a 3D view of a building pad on a graded toposurface.
The following image shows a 3D view of a sloped building pad on a toposurface.
Cut and Fill in a Schedule | 965