background image

WARNING!

  Toll fraud is committed when individuals unlawfully gain 

access to customer telecommunication systems. This is a criminal offense. 
Currently, we do not know of any telecommunications system that is 
immune to this type of criminal activity. AltiGen Communications, Inc. 
will not accept liability for any damages, including long distance charges, 
which result from unauthorized and/or unlawful use. Although AltiGen 
Communications, Inc. has designed security features into its products, it is 
your sole responsibility to use the security features and to establish security 
practices within your company, including training, security awareness, and 
call auditing.

NOTICE

:  While every effort has been made to ensure accuracy, AltiGen 

Communications, Inc., will not be liable for technical or editorial errors or 
omissions contained within the documentation. The information contained 
in this documentation is subject to change without notice.

This documentation may be used only in accordance with the terms of the 
AltiGen Communications, Inc., License Agreement.

AltiContact Manager, AltiGen, AltiServ, AltiWare, AltiLink, AltiConsole, 
AltiAdmin, Alti-IP 600, Alti-MSCRM, Alti-VRPlayer, Zoomerang, 
IPTalk, Alti-Mobile Extension, AltiReport, and SuperQ are trademarks or 
registered trademarks of AltiGen Communications, Inc. All other brand 
names mentioned are trademarks or registered trademarks of their 
respective manufacturers.

AltiGen's products are protected under one or more of the following U.S. 
patents, with other U.S. patents pending:  6532230; 6192344; 6292549; 
6493439; 6909780; 6738465; 6754202; 6766006; 6928078; 6909709;  
6956848.

AltiGen Communications, Inc.
4555 Cushing Pkwy.
Fremont, CA 94538
Telephone:  510-252-9712 

E-mail:    [email protected]

Fax:  510-252-9738             

Web site:   www.altigen.com

Copyright © AltiGen Communications, Inc. 1998-2006. All rights reserved.
Printed in U.S.A. 11/2006 4413-0001-5.0A

Содержание AltiContact Manager Version 5.0A



































































































































































































































































































































































































































































































































































































Отзывы: